ITEADUINO PLUS ARDUINO PLUG

From ITEAD Wiki
Revision as of 07:59, 21 May 2014 by Ivy (Talk | contribs)

Jump to: navigation, search

Overview

Iteaduino Plus Arduino Plug.jpg

Iteaduino Plus Arduino Plug is specifically designed for A10/A20 evaluation board. It adapts Raspberry Pi interface on A10/A20 evaluation board to Arduino interface, which facilitates development as Arduino. There is an OLED screen and Grove interface of electronic brick, which is beneficial to prototyping development.

Specifications

PCB size 109.3mm X 76.2mm X 1.6mm
Operating level 3.3V
Interface 4-pin Grove interface, XBee interface and Raspberry Pi interface

Hardware

IM131016001_1.jpg

pinMap

Index of Interface Definition in Name of Raspberry PI Interface Index of Arduino
Iteaduino Plus
1 3V3 3.3V 3.3V
2 5V 5V 5V
3 SDA0/68 SDA0 A4
4 5V DNC 5V
5 SCL0/67 SCL0 A5
6 GND GND GND
7 20 GPIO7 D9
8 UART4_TX/89 TX D1
9 GND DNC GND
10 UART4_RX/90 RX D0
11 9 GPIO0 D2
12 10 GPIO1 D3
13 11 GPIO2 D4
14 GND DNC GND
15 14 GPIO3 D5
16 15 GPIO4 D6
17 DNC DNC 3.3V
18 16 GPIO5 D7
19 SPI0_MOSI/111 MOSI D11
20 GND DNC GND
21 SPI0_MISO/112 MISO D12
22 19 GPIO6 D8
23 SCL/110 SCLK D13
24 SPI0_CS0/109 SPI0_CE0 D10
25 GND DNC GND
26 SPI0_CS1/137 SPI0_CE1 A3

XBee Interface

Index of Interface Definition in Iteaduino Plus Name of Arduino Index of XBee
1 3.3V 3.3V 3.3V
2 GND GND GND
3 UART4_RX/90 D0 XBee_Dout
4 UART4_TX/89 D1 XBee_Din
5 SPI0_CS1/137 A3 XBee_RST

OLED Interface

Index of Interface Definition in Iteaduino Plus Name of Arduino Index of OLED
1 3.3V 3.3V 3.3V
2 GND GND GND
3 SDA0/68 A4 OLED_SDA
4 SCL0/67 A5 OLED_SCL
5 11 D4 OLED_RST

Operating level switch

IM131016001_2.jpg

By sliding the switch, the power voltage at V pin on the electronic brick will also be changed. When switching to 3,3V, voltage at V pin will be 3.3V and it will be 5V when switching to 5V.

Button

Compatibility