NoticeITEADUINO PLUS ARDUINO PLUG
Contents
Overview
Iteaduino Plus Arduino Plug is specifically designed for A10/A20 evaluation board. It adapts Raspberry Pi interface on A10/A20 evaluation board to Arduino interface, which facilitates development as Arduino. There is an OLED screen and Grove interface of electronic brick, which is beneficial to prototyping development.
Go shopping ITEADUINO PLUS ARDUINO PLUG (IM131016001)
Specifications
| PCB size | 109.3mm X 76.2mm X 1.6mm |
| Operating level | 3.3V |
| Interface | 4-pin Grove interface, XBee interface and Raspberry Pi interface |
Hardware
pinMap
| Index of Interface | Definition in Iteaduino Plus | Index of Arduino |
| 1 | 3V3 | 3.3V |
| 2 | 5V | 5V |
| 3 | SDA0/68 | A4 |
| 4 | 5V | 5V |
| 5 | SCL0/67 | A5 |
| 6 | GND | GND |
| 7 | 16 | D9 |
| 8 | UART4_TX/89 | D1 |
| 9 | GND | GND |
| 10 | UART4_RX/90 | D0 |
| 11 | 9 | D2 |
| 12 | 10 | D3 |
| 13 | 11 | D4 |
| 14 | GND | GND |
| 15 | 12 | D5 |
| 16 | 13 | D6 |
| 17 | 3V3 | 3V3 |
| 18 | 14 | D7 |
| 19 | SPI0_MOSI/111 | D11 |
| 20 | GND | GND |
| 21 | SPI0_MISO/112 | D12 |
| 22 | 15 | D8 |
| 23 | SCL/110 | D13 |
| 24 | 109 | D10 |
| 25 | GND | GND |
| 26 | 113 | A3 |
XBee Interface
| Index of Interface | Definition in Iteaduino Plus | Name of Arduino | Index of XBee |
| 1 | 3.3V | 3.3V | 3.3V |
| 2 | GND | GND | GND |
| 3 | UART4_RX/90 | D0 | XBee_Dout |
| 4 | UART4_TX/89 | D1 | XBee_Din |
| 5 | 113 | A3 | XBee_RST |
OLED Interface
| Index of Interface | Definition in Iteaduino Plus | Name of Arduino | Index of OLED |
| 1 | 3.3V | 3.3V | 3.3V |
| 2 | GND | GND | GND |
| 3 | SDA0/68 | A4 | OLED_SDA |
| 4 | SCL0/67 | A5 | OLED_SCL |
| 5 | 11 | D4 | OLED_RST |
Operating level switch
By sliding the switch, the power voltage at V pin on the electronic brick will also be changed. When switching to 3,3V, voltage at V pin will be 3.3V and it will be 5V when switching to 5V.
Button
- XBee_RST
Reset button of XBee module, press it to reset the module.
Compatibility
Arduino Plug’s compatibility with shields in iMall is shown as below:
| SKU | Name | Compatibility |
| IM120417014 | ITEAD Joystick shield | N |
| IM120417023 | IBridge lite | Y |
| IM120417015 | Arduino Dual Step Motor Driver Shield | Y |
| IM120417022 | IS Shield | Y |
| IM120417017 | Arduino GPS shield | Y |
| IM120417021 | 3.2 TFT LCD Touch Shield | N |
| IM120417018 | Arduino 1602 LCD Shield | N |
| IM120417020 | 2.8 TFT LCD Touch Shield | N |
| IM120417019 | Arduino USB Host Shield | Y |
| IM120628001 | Arduino Mega Sensor Shield | N |
| IM120628002 | Arduino Sensor Shield V4 | Y |
| IM120704001 | BT BoosterPack | N |
| IM120417013 | Arduino Proto Screw Shield | Y |
| IM120417024 | ITDB02 Arduino MEGA Shield | N |
| IM120417012 | 2.4 TFT LCD Touch shield | N |
| IM120417007 | Stackable SD Card shield | Y |
| IM120417006 | BT Shield (Slave) | Y |
| IM120417008 | ITDB02 Arduino Shield | N |
| IM120417005 | MotoMama | Y |
| IM120417009 | IComSat | Y |
| IM120417004 | XBee Shield | Y |
| IM120417010 | BT Shield (Master Slave) | Y |
| IM120417002 | Colors Shield | N |
| IM120417001 | IBridge | N |
| IM120417003 | IE Shield | Y |
| IM120417016 | Arduino Nano IO Shield | N |
| IM120911007 | W5100 Ethernet Shield | Y |
| IM121010001 | WIFI Shield REV2 | Y |
| IM121026001 | ITEAD Music Player Shield | N |
| IM121026002 | ITEAD 3G Shield | Y |
| IM121115001 | ITEAD Power Shield | Y |
| IM121211001 | ITEAD Arduino Sensor Shield | Y |
| IM130704001 | ITEAD BLE Shield | Y |
| IM130715001 | Mega Proto Screw Shield | N |
Download
Datasheet for ITEADUINO PLUS ARDUINO PLUG
Schematic for ITEADUINO PLUS ARDUINO PLUG
