Difference between revisions of "IDSG101"

From ITEAD Wiki
Jump to: navigation, search
m (How to Upgrade Firmware)
m (How to Upgrade Firmware)
 
Line 189: Line 189:
 
Step 3: Drag the firmware into the root directory of U disk.  
 
Step 3: Drag the firmware into the root directory of U disk.  
  
Step 4: Exit the Virtual U Disk mode, ant this time, IDSG101 will detect the upgrade firmware automatically.
+
Step 4: Exit the Virtual U Disk mode, at this time, IDSG101 will detect the upgrade firmware automatically.
  
 
Step 5: When you see the picture as below, please touch the button to upgrade.
 
Step 5: When you see the picture as below, please touch the button to upgrade.

Latest revision as of 02:50, 22 May 2015

Overview

3.jpg

Based on several advanced technologies, IDSG101 can realize some unique functions that common desktop devices have in a small size. Though this device is as small as your hand, it can realize 80M sampling rate, maximum 10 MHz and 10Vpp range output.

IDSG101 is capable of full functional arbitrary waveform management and output. Because the data of arbitrary waveform adopts the files system management and the protocol is fully open to users, users can manage several arbitrary waveform files easily by the technology of virtual U disk.

With a high solution 3 inch full color LCD and resistive touch screen, IDSG101 has an expressive English interface, which helps users to get started using this device easily. IDSG101's firmware can be upgraded, and we will perfect this device gradually according to users' feedback.

Please visit its topic in our forum to know more discussion about this product.

Go shopping IDSG101(IM141013001)

Features

  • 65536 colors, 240*400 solutions, 3 inch colored broadband LCD, and 4 wire resistive touch screen.
  • Built-in 15 kinds of commonly used waveform, 128 m arbitrary waveform storage space
  • The protocol of arbitrary waveform is open, support users editing
  • Can be virtualized in U disk, and realize arbitrary waveform files management.
  • 80M sampling rate, maximum 10MHz output
  • 14 bits high-speed DAC and 10Vpp output
  • Maximum 32768 dots arbitrary waveform channel, dots can be control at will
  • 5V power supply, 200mA~400mA current consumption

Specification

  • Waveforms
Standard Waveform Sine, Square, Triangle, Sawtooth rise , Sawtooth fall, Sinc ,Noise, Exponential rise, Exponential fall, Positive full-wave, Negative full-wave, Positive half-wave, Negative half-wave, Gaussian ,DC
Sample Rate 80 MS/s
Vertical Resolution 14 bit
Arbitrary Waveform Length 2 to 32 K points
Built-in storage 128 M


  • Frequency Characteristics
Output range Sine 1 mHz ~ 10 MHz
Square 1 mHz ~ 10 MHz
Others 1 mH ~ 1 MHz
Resolution 1mHz
Accuracy 50 ppm


  • Voltage characteristics
Output range 10 mVpp ~ 10 Vpp
Resolution 12 bit
Accuracy 8% of Setpoint
Offset Range ±5V
Amplitude Flatness ≥0.3 dB


  • Square characteristics
Duty Cycle 0.1%~99.9% (1mHz~1MHz)
lock 50% (1MHz~10MHz)
Rise/Fall Time <20 ns
Overshoot <5%


  • General
output Impedance 50 Ω
Ramp Symmetry 0.1%~99.9%
Sync signal TTL ( 4.8 V~5.2 V )
Power requirements DC ( 4.75 V~5.25 V, < 400 mA)
Display characteristics 3-inch, 240x400 resolution
Dimensions (L x W x H) 116 mmx76 mmx26 mm
Weight 180 g

Basic Operation

Connectors

IDSG101 0.jpg IDSG101 1.jpg


Sync Connector: Sync Output. When you out put a standard wave through this connector, you will see a TTL wave (low level 0V, high level 5V) that have the same frequency and phrase with the standard wave you choose. It can be the clock or trigger signal of digital system when sync connector connect with digital system. Output Connector: Waveform output end. With an output Impedance of 50Ω, IDSG101 can output standard/arbitrary waveform though this connector. Please note that high voltage cannot be accessed to this connector.

Micro USB: For power supply and computer connecting.

Extension Connector: This connector includes UART, interface of trigger input/output.


Operation Interface

The operation interface pictures show as below. Since IDSG101 adopts a resistive screen, you’d better use touch pen to do operating.

Start interface (Support two languages: Chinese and English)

IM141013001 41.png


Function set

IM141013001i.png

Arbitrary waveform choosing

IM141013001k.png


Burst interface

IM141013001 42.png


Sweep interface

IM141013001 43.png


System set

IM141013001l.png

IDSG101 works as a virtual U disk

IDSG101 has a 128M memory that can storage the whole system and your arbitrary waveform files. Connect IDSG101 to your computer via USB cable, and then you need to press the “enter USB flash disk mode” button to make your computer identify this device.

IDSG101 2.png

When they connect together, you can find two folders in the removable disk: <system> and <arb_wave>.

System folder cannot be modified. And you can put your waveform files in the folder <arb_wave>. Please note that IDGS101 supports wvt file only. If not this format, you’d better transform it to.

How to generate wvt waveform files

IDSG101 supports wvt waveform files only, we offer two methods to generate a wvt files.

  • Use Agilent Waveform Editor & Harmonic Wave Creator:

http://blog.iteadstudio.com/idsg101-manual-how-to-transform-the-arbitrary-waveform-format-part-1/

  • Use MATLAB:

http://blog.iteadstudio.com/idsg101-manual-how-to-transform-the-arbitrary-waveform-format-part-2/

How to Upgrade Firmware

Firmware is keeping upgrading to fix the bugs and perfect the product.

Step 1: Download the firmware(update.bin file)

Step 2: Connect IDSG101 to you PC, and enter into the Virtual U Disk mode.

Step 3: Drag the firmware into the root directory of U disk.

Step 4: Exit the Virtual U Disk mode, at this time, IDSG101 will detect the upgrade firmware automatically.

Step 5: When you see the picture as below, please touch the button to upgrade.

Step 6: When upgrading the firmware, don't do any operation on this device, and don't cut off the power, otherwise, the upgrade will fail.

IDSG101 firmware 1.png

IDSG101 firmware 2.png

Step 7: To ensure the upgrade of firmware is successful, you can check your firmware information in System -> About

Arbitrary waveform display in IDSG101

IM141013001 11.jpg IM141013001 12.jpg IM141013001 13.jpg IM141013001 14.jpg IM141013001 15.jpg IM141013001 16.jpg IM141013001 17.jpg IM141013001 18.jpg IM141013001 19.jpg IM141013001 20.jpg IM141013001 21.jpg IM141013001 22.jpg IM141013001 23.jpg IM141013001 24.jpg IM141013001 25.jpg IM141013001 26.jpg IM141013001 27.jpg IM141013001 28.jpg IM141013001 29.jpg IM141013001 30.jpg IM141013001 31.jpg IM141013001 32.jpg IM141013001 33.jpg IM141013001 34.jpg IM141013001 35.jpg IM141013001 37.jpg IM141013001 38.jpg IM141013001 39.jpg IM141013001 40.jpg

Internal PCB

IM141013001 1.jpg IM141013001 2.jpg

Useful Link & Download