Core EVB

From ITEAD Wiki
Revision as of 08:12, 24 September 2014 by ITead (Talk | contribs)

Jump to: navigation, search

Overview

IM140725003 2.jpg

Core EVB is a customized evaluation board for ITEAD Core AW204x, which pinouts the functional pins of AW204x to the corresponding physical interface such as USB ports, SD card slot Ethernet port etc. Moreover, Core EVB provides a 40 pins interface that is compatible with RPI B+, which will help developers utilize the existing Add-on more easily.

Common A20 development boards in the market only provide Line-in/Line-out interface so that they can't drive a loudspeaker directly. However, we add power amplifier so that it can drive 4ohm or 8ohm speaker easily.

The dimension of Core EVB is designed according to an aluminum box, thus, this development board can be embedded into IBOX.

Go shopping [Core EVB(IM140725003)]

Specification

Compatible Module AW2041 & AW2042
Display LVDS * 1 18/24 bit single or dual channel
HDMI * 1 HDMI 1.4
Audio audio jack * 1 3.5mm CTIA,drive capability: 8ohm speaker @3w
SPDIF * 1 SPDIF fiber
I/O 2*16 pin (J4) UART/I2C/SPI/I2S/GPIO
2*20 pin (J5) UART/I2C/SPI/GPIO, Compatible with RPI B+ 40-pin interface
Ethernet Ethernet * 1 10M/100M/1000M adaptable
USB 4 3 for USB2.0 full speed, 1 for USB OTG
IR 1
Indicator 1 bicolor LED
Button 3 Power/Reset/FEL
Power 1 7-23V DC in,2.5mm power jack
Storage SATA * 1 on-board SATA on AW204x;on-board external 5V SATA on Core EVB
Micro-SD * 1 support micro SD card up to 32G

Electronic Characteristics

Working environment

  • Temperature: 0℃ ~ 60℃
  • Humidity:5% ~ 95%

Storage environment:

  • Temperature: -40℃ ~ 80℃
  • Humidity: 5% ~ 95%

Current Consumption

The current consumption is based on the following situation without any device assessing to Core EVB

  • Core: AW2041
  • Core EVB
Min Type Max Unit
Current Consumption - 200 300 mA

Hardware

  • Dimension: 140.2mm×90mm
  • Wight:82g

IM140725003pic1.jpg IM140725003pic2.jpg IM140725003pic3.jpg

Pin Map

  • USB

IM140725003pic4.jpg

Number Name
1 +5V
2 USB_Data-
3 USB_Data+
4 GND


  • J4(32-pin) interface

IM140725003pic5.jpg

name IO number number IO name
DM0 1 2 DP0
VGA-R TVOUT2 3 4 NC
VGA-G TVOUT0 5 6 TVOUT1 VGA-B
VGA-HS PD26 7 8 PD27 VGA-VS
UART0-TX PB22 9 10 PB23 UART0-RX
UART1-TX PG10 11 12 PG11 UART1-RX
I2C1-SDA PB19 13 14 PB18 I2C1-SCL
SPIO-SCK PI11 15 16 PI13 SPIO-MI
SPI0-MO PI12 17 18 PI10 SPI0-CS
LINL 19 20 HPL
LINR 21 22 HPR
HCOM 23 24 UBOOT
I2S-MCLK PB5 25 26 PB6 I2S-BCLK
I2S-LRCLK PB7 27 28 PB8 I2S-DOUT
GND 29 30 3V3
5V 31 32 VIN


  • J5 (40pin RPI B+)

IM140725003pic6.jpg

name IO number number IO name
3V3 1 2 5V
I2C1-SDA PB19 3 4 5V
I2C1-SCL PB18 5 6 GND
PI15 7 8 PG10 UART1-TX
GND 9 10 PG11 UART1-RX
PI16 11 12 PI17
PI18 13 14 GND
PI19 15 16 PI20
3V3 17 18 PI21
SPI0-MO PI12 19 20 GND
SPI0-MI PI13 21 22 PG0
SPI0-SCK PI11 23 24 PI10 SPI0-CS
GND 25 26 PI14 SPI0-CS1
I2C2-SDA PB21 27 28 PB20 I2C2-SCL
PG1 29 30 GND
PG2 31 32 PG3
PG4 33 34 GND
PG5 35 36 PG6
PG7 37 38 PG8
GND 39 40 PG9
  • LCD pin map

IM140725003pic7.jpg

name IO number number IO name
GND 1 2 GND
GND 3 4 GND
GND 5 6 GND
GND 7 8 GND
PD27 PD27 9 10 PD26 PD26
PD25 PD25 11 12 PD24 PD24
PD23 PD23 13 14 PD22 PD22
PD21 PD21 15 16 PD20 PD20
PD19 PD19 17 18 PD18 PD18
PD17 PD17 19 20 PD16 PD16
PD15 PD15 21 22 PD14 PD14
PD13 PD13 23 24 PD12 PD12
PD11 PD11 25 26 PD10 PD10
PD9 PD9 27 28 PD8 PD8
PD7 PD7 29 30 PD6 PD6
PD5 PD5 31 32 PD4 PD4
PD3 PD3 33 34 PD2 PD2
PD1 PD1 35 36 PD0 PD0
Y2 37 38 Y1
X2 39 40 X1

Core Installation

Brand new SO-DIMM 204 pins socket is for plugging in and pulling out ITEAD core easily. The following picture will show you how to install core to EVB.

IM140725003pic8.jpg

You can unplug the core by pulling out the clasps both on the right and left side.

IM140725003pic9.jpg

Download

Useful Link