Sonoff 4CH

Overview

Sonoff 4CH is an ESP8285 WiFi module based 4 channel (4-way) WiFi wireless switch. Sonoff 4CH supports to connect and control 4 home appliances, which can be turned on/off separately by the buttons or iOS and Android APP EweLink.Owning a Sonoff 4CH means you have 4 Sonoff basic WiFi switches integrate together.

The enclosure supports din-rail mount! A DIN rail is a metal rail of a standard type widely used for mounting circuit breakers and industrial control equipment inside equipment racks. These products are typically made from cold rolled carbon steel sheet with a zinc-plated or chromated bright surface finish.

Sonoff 4CH belongs to Sonoff family, definitely, it bears all the functions basic Sonoff has. In EweLink, you can remote turn on/off from anywhere at any time, set single/repeat/countdown timing schedules to turn on/off at a specified time, share to others so that they can control together.

Sonoff 4CH is hacker-friendly! You can flash external firmware!

Go shopping Sonoff 4CH(SKU:IM160913003)

Features

Support independently turn on/off 4 home appliances
Support to control home appliances by local toggle buttons or APP
Support tracking device status and timely remote control through APP
Support countdown timing and schedule timing
Support one-key sharing device to other user

Electrical Characteristics

Voltage range: 90-250v AC(50/60Hz)
Max current: 10A
Max Power: 2200W
Humidity: 5%-95%
Wireless Frequency: 2.4Ghz
Working Temp: ﹣20℃-75℃
Max soldering temperature: 260℃

Wiring Instruction

L-In: Input LIVE

Button of CH1 is also WiFi pairing button. Press and hold it until LED flash into pairing state.

L1,L2,L3,L4 port respectively connects to LIVE of channel 1, channel 2, channel 3, channel 4.

You can randomly connects to any of the five N port and 5 GND port for your device.

WIFI Characteristics

• 802.11 b/g/n

• Built-in Tensilica L106 ultra-low power consumption 32-bit micro-MCU, dominant frequency support 80 MHz and 160 MHz, support RTOS

• Built-in TCP/IP protocol stack

• Built-in TR switch, balun, LNA, power amplifier and matching network

• Built-in PLL, voltage regulator and power supply management components, 802.11b mode +20 dBm output power

• A-MPDU&A-MSDU aggregation and 0.4μs guard interval

• WiFi @ 2.4 GHz, supports WPA / WPA2 safe mode

• Support cloud OTA upgrade

• Support STA/AP/STA + AP mode

• Standby power consumption is less than 1.0 mW (DTIM3)

• Operating temperature range: -40 ℃ - 125 ℃

• Other parameters are as follows

Category	Parameters	Description
Wireless Parameter	Wireless standard	802.11 b/g/n
Wireless Parameter	Frequency range	2.4GHz-2.5GHz (2400M-2483.5M)
Hardware Parameter	Data port	UART/I2C
	Data port	GPIO/PWM
	Operating voltage	3.0~3.6V(recommend 3.3V)
	Operating current	Average： 80mA
	Operating temperature	-40°~125°
	Storage temperature	Room temperature
	PCBA size	122.287.21.2mm
Software Parameter	Wireless network mode	station/softAP/SoftAP+station
	Security mechanism	WPA/WPA2
	Encryption type	WEP/TKIP/AES
	Firmware upgration	Local serial programming/Cloud Upgrade/Host download programming
	Software development	Support secondary development
	Network protocols	IPv4, TCP/UDP/HTTP/FTP
	User configuration	cloud server, Android/iOS APP