NoticeAll translations
Enter a message name below to show all available translations.
Found 2 translations.
| Name | Current message text |
|---|---|
| h English (en) | ==Instruction== *Plug Rpi Arduino [[Shield]] Add-on into RPI V2, connect SHT10 to IIC interface through 4-pin wires. Power Raspberry Pi V2. *[[Download]] the SDK from this link: https://github.com/iteadsw/SDK and then install it. *Modify the file ReadSHT1xValues.ino : modified codes as below: ::define dataPin 3 ::define clockPin 5 *Enter into the directory '''libraries/itead_SHT1x/examples/ReadSHT1xValues''', compile and run the file '''ReadSHT1xValues.ino''' :Command as below to compile ReadSHT1xValues.ino ::$ iteadcompile ReadSHT1xValues ReadSHT1xValues.ino :Command to run this program ::$ sudo ./ ReadSHT1xValues *When the compilation is done, you can read the temperature and humidity data from the terminal. |
| h Chinese (China) (zh-cn) | ==使用说明== *将RpiArduinoShieldAddon插到RPI V2上面，将SHT10通过电子积木4pin连线接到IIC电子积木接口上，上电。 *从https://github.com/itead/SDK 下载SDK并安装。 *修改文件 ReadSHT1xValues.ino : 修改后的编码如下: ::define dataPin 3 ::define clockPin 5 *进入目录 '''libraries/itead_SHT1x/examples/ReadSHT1xValues''', 编译运行 '''ReadSHT1xValues.ino''' :编译ReadSHT1xValues.ino的指令如下 ::$ iteadcompile ReadSHT1xValues ReadSHT1xValues.ino :运行指令如下 ::$ sudo ./ ReadSHT1xValues *最后可以从终端上读到传感器传回的温湿度值 |
