ITEAD 3G Shield
From ITEAD Wiki
Contents
Overview
The 3G shield is based on SIM5216A or SIM5216E module. The 3G shield can be used for 3G communication, it is controlled via AT commands and fully compatible with Arduino. The difference between SIM5216A and SIM5216E is as folllows:
Features
- Multi-modules support: SIM5216A/SIM5216E/SIM5216J
- Configurable pins for UART communication
- With the MIC and earphone interface
- Control via AT commands
- RTC supported with Super Capacitor
- Optimization of the power supply circuit
- Operation temperature: -40℃ ~ +85℃
Specifications
PCB size | 91.93mmX57.15mm X 1.6mm |
Indicators | PWR,5V,2.8V, Status |
Power supply | 5V support by Arduino |
Communication Protocol | UART |
Electrical Characteristics
Specification | Min | Type | Max | Unit |
Power Voltage | 4.5 | 5 | 5.5 | VDC |
Input Voltage VH (5V): | 2.3 | 5 | 5.5 | V |
Input Voltage VL (5V): | -0.3 | 0 | 1 | V |
Current Consumption | - | - | 300 | mA |
Hardware
Figure 1 Top Map
Pin Map
Arduino PIN | Description |
D0 | - |
D1 | - |
D2 | - |
D3 | - |
D4 | - |
D5 | - |
D6 | - |
D7 | - |
D8 | POWER (High Active) |
D9 | Reset (High Active) |
D10 | - |
D11 | - |
D12 | - |
D13 | - |
A0 | - |
A1 | - |
A2 | - |
A3 | - |
A4 | - |
A5 | - |