NoticeDifference between revisions of "Core EVB"
m (→Overview) |
m (→Hardware) |
||
| Line 76: | Line 76: | ||
|} | |} | ||
==Hardware== | ==Hardware== | ||
| − | Dimension: 140.2mm×90mm | + | *Dimension: 140.2mm×90mm |
| − | Wight：82g | + | *Wight：82g |
[[File:IM140725003pic1.jpg|500px]] | [[File:IM140725003pic1.jpg|500px]] | ||
Revision as of 08:00, 24 September 2014
Contents
Overview
Core EVB is the evaluation board customized for ITEAD CORE AW204x. It leads the functional pins of core A20 to the corresponding physical interface such as USB ports, SD card slot Ethernet port etc. Moreover, Core EVB provides a 40 pins interface that is compatible with RPI B+, which will help developers utilize the existing resources to make a better project. The common development boards in the market only provide Line-in/Line-out interface so that they can't drive loudspeaker directly. However, we add level 1 power amplifier circuit on the board's back, which can help users drive 4ohm and 8ohm headset with ease.
The dimension of Core EVB is designed according to the aluminum box size of IBOX, thus, this development board can be embedded into IBOX aluminum box.
Go shopping [Core EVB(IM140725003)]
Specification
| Compatible Module | AW2041 & AW2042 | |
| Display | LVDS * 1 | 18/24 bit single or dual channel |
| HDMI * 1 | HDMI 1.4 | |
| Audio | audio jack * 1 | 3.5mm CTIA，drive capability: 8ohm speaker @3w |
| SPDIF * 1 | SPDIF fiber | |
| I/O | 2*16 pin (J4) | UART/I2C/SPI/I2S/GPIO |
| 2*20 pin (J5) | UART/I2C/SPI/GPIO, Compatible with RPI B+ 40-pin interface | |
| Ethernet | Ethernet * 1 | 10M/100M/1000M adaptable |
| USB | 4 | 3 for USB2.0 full speed, 1 for USB OTG |
| IR | 1 | |
| Indicator | 1 | bicolor LED |
| Button | 3 | Power/Reset/FEL |
| Power | 1 | 7-23V DC in,2.5mm power jack |
| Storage | SATA * 1 | on-board SATA on AW204x;on-board external 5V SATA on Core EVB |
| Micro-SD * 1 | support micro SD card up to 32G | |
Electronic Characteristics
Working environment
- Temperature: 0℃ ～ 60℃
- Humidity：5% ～ 95%
Storage environment:
- Temperature: -40℃ ～ 80℃
- Humidity: 5% ～ 95%
Current Consumption
The current consumption is based on the following situation without any device assessing to Core EVB
- Core: AW2041
- Core EVB
| Min | Type | Max | Unit | |
| Current Consumption | - | 200 | 300 | mA |
Hardware
- Dimension: 140.2mm×90mm
- Wight：82g
Pin Map
- USB
| Number | Name |
| 1 | +5V |
| 2 | USB_Data- |
| 3 | USB_Data+ |
| 4 | GND |
- J4(32-pin) interface
| name | IO | number | number | IO | name |
| DM0 | 1 | 2 | DP0 | ||
| VGA-R | TVOUT2 | 3 | 4 | NC | |
| VGA-G | TVOUT0 | 5 | 6 | TVOUT1 | VGA-B |
| VGA-HS | PD26 | 7 | 8 | PD27 | VGA-VS |
| UART0-TX | PB22 | 9 | 10 | PB23 | UART0-RX |
| UART1-TX | PG10 | 11 | 12 | PG11 | UART1-RX |
| I2C1-SDA | PB19 | 13 | 14 | PB18 | I2C1-SCL |
| SPIO-SCK | PI11 | 15 | 16 | PI13 | SPIO-MI |
| SPI0-MO | PI12 | 17 | 18 | PI10 | SPI0-CS |
| LINL | 19 | 20 | HPL | ||
| LINR | 21 | 22 | HPR | ||
| HCOM | 23 | 24 | UBOOT | ||
| I2S-MCLK | PB5 | 25 | 26 | PB6 | I2S-BCLK |
| I2S-LRCLK | PB7 | 27 | 28 | PB8 | I2S-DOUT |
| GND | 29 | 30 | 3V3 | ||
| 5V | 31 | 32 | VIN |
- J5 (40pin RPI B+)
| name | IO | number | number | IO | name |
| 3V3 | 1 | 2 | 5V | ||
| I2C1-SDA | PB19 | 3 | 4 | 5V | |
| I2C1-SCL | PB18 | 5 | 6 | GND | |
| PI15 | 7 | 8 | PG10 | UART1-TX | |
| GND | 9 | 10 | PG11 | UART1-RX | |
| PI16 | 11 | 12 | PI17 | ||
| PI18 | 13 | 14 | GND | ||
| PI19 | 15 | 16 | PI20 | ||
| 3V3 | 17 | 18 | PI21 | ||
| SPI0-MO | PI12 | 19 | 20 | GND | |
| SPI0-MI | PI13 | 21 | 22 | PG0 | |
| SPI0-SCK | PI11 | 23 | 24 | PI10 | SPI0-CS |
| GND | 25 | 26 | PI14 | SPI0-CS1 | |
| I2C2-SDA | PB21 | 27 | 28 | PB20 | I2C2-SCL |
| PG1 | 29 | 30 | GND | ||
| PG2 | 31 | 32 | PG3 | ||
| PG4 | 33 | 34 | GND | ||
| PG5 | 35 | 36 | PG6 | ||
| PG7 | 37 | 38 | PG8 | ||
| GND | 39 | 40 | PG9 |
- LCD pin map
| name | IO | number | number | IO | name |
| GND | 1 | 2 | GND | ||
| GND | 3 | 4 | GND | ||
| GND | 5 | 6 | GND | ||
| GND | 7 | 8 | GND | ||
| PD27 | PD27 | 9 | 10 | PD26 | PD26 |
| PD25 | PD25 | 11 | 12 | PD24 | PD24 |
| PD23 | PD23 | 13 | 14 | PD22 | PD22 |
| PD21 | PD21 | 15 | 16 | PD20 | PD20 |
| PD19 | PD19 | 17 | 18 | PD18 | PD18 |
| PD17 | PD17 | 19 | 20 | PD16 | PD16 |
| PD15 | PD15 | 21 | 22 | PD14 | PD14 |
| PD13 | PD13 | 23 | 24 | PD12 | PD12 |
| PD11 | PD11 | 25 | 26 | PD10 | PD10 |
| PD9 | PD9 | 27 | 28 | PD8 | PD8 |
| PD7 | PD7 | 29 | 30 | PD6 | PD6 |
| PD5 | PD5 | 31 | 32 | PD4 | PD4 |
| PD3 | PD3 | 33 | 34 | PD2 | PD2 |
| PD1 | PD1 | 35 | 36 | PD0 | PD0 |
| Y2 | 37 | 38 | Y1 | ||
| X2 | 39 | 40 | X1 |
Core Installation
Brand new SO-DIMM 204 pins socket is for plugging in and pulling out ITEAD core easily. The following picture will show you how to install core to EVB.
You can unplug the core by pulling out the clasps both on the right and left side.
