NoticeDifference between revisions of "AC-DC Power Module 5V 500mA"
From ITEAD Wiki
m (→Overview) |
m (→Overview) |
||
| Line 1: | Line 1: | ||
==Overview== | ==Overview== | ||
[[File:AC-DC Power Module 5V 500mA (7).jpg|thumb|400px|right]] | [[File:AC-DC Power Module 5V 500mA (7).jpg|thumb|400px|right]] | ||
| − | This power module is an isolated-type industrial level power module that can be used in AC-DC power converting. When the situations of over voltage, over current and short circuit appear, this module will help to protect whole device by locking up. What’s more, It can realize isolating the high and low voltage and support AC 90-265V input and DC 5V output. Its master chip is high-performance, low-power consumption IW1700 (no-load power consumption less than 5mW). | + | This AC-DC Power Module 5V 500mA V3 power module is an isolated-type industrial level power module that can be used in AC-DC power converting. When the situations of over voltage, over current and short circuit appear, this module will help to protect whole device by locking up. What’s more, It can realize isolating the high and low voltage and support AC 90-265V input and DC 5V output. Its master chip is high-performance, low-power consumption IW1700 (no-load power consumption less than 5mW). |
Go shopping [http://imall.itead.cc/ac-dc-power-module-5v-500ma-v3.html AC-DC Power Module 5V 500mA V3] | Go shopping [http://imall.itead.cc/ac-dc-power-module-5v-500ma-v3.html AC-DC Power Module 5V 500mA V3] | ||
Latest revision as of 03:53, 8 January 2016
Overview
.jpg)
This AC-DC Power Module 5V 500mA V3 power module is an isolated-type industrial level power module that can be used in AC-DC power converting. When the situations of over voltage, over current and short circuit appear, this module will help to protect whole device by locking up. What’s more, It can realize isolating the high and low voltage and support AC 90-265V input and DC 5V output. Its master chip is high-performance, low-power consumption IW1700 (no-load power consumption less than 5mW).
Go shopping AC-DC Power Module 5V 500mA V3
Feature
- Intelligent low power management achieves ultra-low operating current at no-load
- Adaptive load transient detection and fast response
- Low 1.7uA Start-Up Current
- Optimized 72 kHz maximum PWM switching frequency achieves best size and effi ciency
- Adaptive multi-mode PWM/PFM control improves efficiency
- Direct drive of low-cost BJT switch
- Built-in current sense resistor short circuit protection
Specification
| PCB Size | 30X20X1.6mm |
| Voltage Input | AC Input Range 90-264Vac |
| Voltage Output | DC5V with output compensation |
| Current Output | 500mA |
Electrical Characteristics
| Characteristics | Symbol | Min | Typ | Max | Unit |
| Input | |||||
| Voltage | VIN | 90 | - | 264 | VAC |
| Frequency | FLINE | 47 | 50/60 | 63 | HZ |
| Output | |||||
| Output Voltage | VOUT | 4.9 | 5.00 | 5.3 | V |
| Output Current | IOUT | 0 | 500 | mA | |
| Total Output Power | |||||
| Continuous Output Power | POUT | 2.5 | W | ||
| Over Current Protection | IOUT_MAX | 600 | mA | ||
| Active Mode Efficiency | | 70 | % | ||
| Environmental | |||||
| Ambient Temperature | TAMB | 0 | 40 | °C |
Hardware
File:AC-DC Power Module 5V 500mA-dimension.pdf
File:AC-DC Power Module 5V 500mA-VIEW.pdf
