AC-DC Power Module 5V 500mA

From ITEAD Wiki
Jump to: navigation, search


AC-DC Power Module 5V 500mA (7).jpg

This AC-DC Power Module 5V 500mA V3 power module is an isolated-type industrial level power module that can be used in AC-DC power converting. When the situations of over voltage, over current and short circuit appear, this module will help to protect whole device by locking up. What’s more, It can realize isolating the high and low voltage and support AC 90-265V input and DC 5V output. Its master chip is high-performance, low-power consumption IW1700 (no-load power consumption less than 5mW).

Go shopping AC-DC Power Module 5V 500mA V3


  • Intelligent low power management achieves ultra-low operating current at no-load
  • Adaptive load transient detection and fast response
  • Low 1.7uA Start-Up Current
  • Optimized 72 kHz maximum PWM switching frequency achieves best size and effi ciency
  • Adaptive multi-mode PWM/PFM control improves efficiency
  • Direct drive of low-cost BJT switch
  • Built-in current sense resistor short circuit protection


PCB Size 30X20X1.6mm
Voltage Input AC Input Range 90-264Vac
Voltage Output DC5V with output compensation
Current Output 500mA

Electrical Characteristics

Characteristics Symbol Min Typ Max Unit
Voltage VIN 90 - 264 VAC
Frequency FLINE 47 50/60 63 HZ
Output Voltage VOUT 4.9 5.00 5.3 V
Output Current IOUT 0 500 mA
Total Output Power
Continuous Output Power POUT 2.5 W
Over Current Protection IOUT_MAX 600 mA
Active Mode Efficiency 70 %
Ambient Temperature TAMB 0 40 °C


File:AC-DC Power Module 5V 500mA-dimension.pdf

File:AC-DC Power Module 5V 500mA-VIEW.pdf

Useful Link