NoticeDifference between revisions of "ITEAD Joystick shield"
From ITEAD Wiki
(→Pins description) |
m (→Useful Links) |
||
| (4 intermediate revisions by one other user not shown) | |||
| Line 5: | Line 5: | ||
The momentary push buttons are connected to Arduino digital pins 2-6; when pressed they will pull the pin low (utilizing the internal pull-ups of the Arduino). Vertical movement of the joystick will produce a proportional analog voltage on analog pin 0, likewise, horizontal movement of the joystick can be tracked on analog pin 1. | The momentary push buttons are connected to Arduino digital pins 2-6; when pressed they will pull the pin low (utilizing the internal pull-ups of the Arduino). Vertical movement of the joystick will produce a proportional analog voltage on analog pin 0, likewise, horizontal movement of the joystick can be tracked on analog pin 1. | ||
| + | |||
| + | Go shopping [http://imall.iteadstudio.com/im120417014.html ITEAD Joystick shield (IM120417014)] | ||
==Specifications== | ==Specifications== | ||
| Line 88: | Line 90: | ||
===Jumper description=== | ===Jumper description=== | ||
| + | {| class="wikitable" | ||
| + | |- | ||
| + | | align="center" style="background:#f0f0f0;"|'''Switch''' | ||
| + | | align="center" style="background:#f0f0f0;"|'''Description''' | ||
| + | |- | ||
| + | | +3.3V||Work with 3.3V system, like IFLAT32, [[Iteadmaple]] | ||
| + | |- | ||
| + | | +5V||Work with 5V system, like Arduino, Iteaduino | ||
| + | |} | ||
===Pin map description=== | ===Pin map description=== | ||
| + | {| border="1" | ||
| + | |||
| + | | VCC||B OUTPUT||A OUTPUT||Y OUTPUT||X OUTPUT||GND | ||
| + | |- | ||
| + | | GND||C OUTPUT||D OUTPUT||E OUTPUT||F OUTPUT||G OUTPUT | ||
| + | |} | ||
==Download== | ==Download== | ||
| + | [ftp://imall.iteadstudio.com/IM120417014_ITEAD_Joystick_shield/DS_IM120417014_ITEAD_Joystick_shield.pdf Datasheet for ITEAD Joystick shield] | ||
| + | |||
| + | [ftp://imall.iteadstudio.com/IM120417014_ITEAD_Joystick_shield/SCH_IM120417014_ITEAD_Joystick_shield.pdf Schematic for ITEAD Joystick shield] | ||
==Useful Links== | ==Useful Links== | ||
| + | *[https://github.com/AugustoPujato/JoystickShield_IteadStudio '''ITEAD JoyStick Shield Library'''] by AugustoPujato | ||
| + | :This library is an arduino library that can be used with ITEAD Joy Stick Shield. | ||
Latest revision as of 06:40, 21 November 2014
Contents
Overview
The Joystick Shield kit contains all the parts you need to enable your Arduino with a joystick! The shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controllers.
The momentary push buttons are connected to Arduino digital pins 2-6; when pressed they will pull the pin low (utilizing the internal pull-ups of the Arduino). Vertical movement of the joystick will produce a proportional analog voltage on analog pin 0, likewise, horizontal movement of the joystick can be tracked on analog pin 1.
Go shopping ITEAD Joystick shield (IM120417014)
Specifications
| PCB size | 53.3mm X 68.6mm X 1.6mm |
| Power supply | 5V/3.3V DC |
| RoSH | Yes |
Electrical Characteristics
| Parameter | Min. | Typical | Max. | Unit |
| Power voltage | 3 | 5 | 5.5 | VDC |
| Input voltage VH (Target Voltage = 3.3V) | 3 | 3.3 | 3.6 | V |
| Input voltage VH (Target Voltage = 5V) | 4.5 | 5 | 5.5 | V |
| Input voltage VL | -0.3 | 0 | 0.5 | V |
| Current Consumption | - | 20 | 40 | mA |
Hardware
Pins description
| Pin | Output type | Description |
| D0 | NA | No Connection |
| D1 | NA | No Connection |
| D2 | NA | No Connection |
| D3 | Digital | Button E Output |
| D4 | Digital | Button D Output |
| D5 | Digital | Button C Output |
| D6 | Digital | Button B Output |
| D7 | Digital | Button A Output |
| D8 | Digital | Button F Output |
| D9 | Digital | Button G Output |
| D10 | NA | No Connection |
| D11 | NA | No Connection |
| D12 | NA | No Connection |
| D13 | NA | No Connection |
| A0 | Analog | Joystick Y Ouput |
| A1 | Analog | Joystick X Ouput |
| A2 | NA | No Connection |
| A3 | NA | No Connection |
| A4 | NA | No Connection |
| A5 | NA | No Connection |
Jumper description
| Switch | Description |
| +3.3V | Work with 3.3V system, like IFLAT32, Iteadmaple |
| +5V | Work with 5V system, like Arduino, Iteaduino |
Pin map description
| VCC | B OUTPUT | A OUTPUT | Y OUTPUT | X OUTPUT | GND |
| GND | C OUTPUT | D OUTPUT | E OUTPUT | F OUTPUT | G OUTPUT |
Download
Datasheet for ITEAD Joystick shield
Schematic for ITEAD Joystick shield
Useful Links
- ITEAD JoyStick Shield Library by AugustoPujato
- This library is an arduino library that can be used with ITEAD Joy Stick Shield.
