Difference between revisions of "Translations:ITDB02-2.8/11/en"

{| class="wikitable"
|-
| align="center" style="background:#f0f0f0;"|'''Pin'''
| align="center" style="background:#f0f0f0;"|'''Type*'''
| align="center" style="background:#f0f0f0;"|'''Description'''
|-
| GND||G||Ground
|-
| VCC||P||5V Power Supply pin
|-
| NC||-||No connection
|-
| RS||I||Data/Command selection
|-
| WR||I||Write signal enable, low active
|-
| RD||I||Read signal enable, low active
|-
| DB8||I||Data Bus
|-
| DB9||I||Data Bus
|-
| DB10||I||Data Bus
|-
| DB11||I||Data Bus
|-
| DB12||I||Data Bus
|-
| DB13||I||Data Bus
|-
| DB14||I||Data Bus
|-
| DB15||I||Data Bus
|-
| CS||I||Chip Selection，Low level active
|-
| NC||-||No connection
|-
| LED||P||Backlight
|-
| NC||-||No connection
|-
| DB0||-||No connection(8bit and 16bit mode)
|-
| DB1||-||No connection(8bit and 16bit mode)
|-
| DB2||-||No connection(8bit and 16bit mode)
|-
| DB3||-||No connection(8bit and 16bit mode)
|-
| DB4||-||No connection(8bit and 16bit mode)
|-
| DB5||-||No connection(8bit and 16bit mode)
|-
| DB6||-||No connection(8bit and 16bit mode)
|-
| DB7||-||No connection(8bit and 16bit mode)
|-
| T_CLK||I||Touch clock
|-
| T_CS||I||Touch chip selection
|-
| T_DIN||I||Touch data input
|-
| T_BUSY||O||Touch status
|-
| T_DOUT||O||Touch data output
|-
| T_IRQ||O||Touch interrupt
|-
| SD_SO||O||SD MISO
|-
| SD_SCK||I||SD SCK
|-
| SD_SI||I||SD MOSI
|-
| SD_NSS||I||SD NSS
|-
| NC||-||No connection
|-
| NC||-||No connection
|}