Wee Serial WIFI Module

Overview

Wee is a WIFI module based on ESP8266 SoC. ESP8266 comes out of nowhere and has been taking by storm the IoT world. You can find many hacking projects about it on the internet. So far, the most popular ESP8266 breakout version only has GPIO0 and GPIO2 routed to the header. Compared to it, Wee WIFI module is designed with a standard Bee interface and has more GPIOs available for developers. In a word, users can take full use of the utility of ESP8266 SoC by using Wee WIFI module in your projects.

Go shopping [Wee Serial WIFI Module]

Features

• Standard Bee interface
• indicators: TX, RX, PWR
• FW/Work Switch – when burn firmware into ESP8266, you should ensure the switch is in FW status. For the normal usage of this module, you should ensure the switch is in work status.
• More GPIOs help developer take full use of the utility of ESP8266 SoC

Specification

PCB Size	23.9X26.2X1.6mm
Interface	Bee interface
Indicators	PWR，TX，RX

Electrical Characteristics

Characteristics	Symbol	Min	Typ	Max	Unit
Power supply voltage	VDD	3	3.3	3.5	V
High input voltage	VIH	0.8XVDD	-	VDD	V
Low input voltage	VIL	0	-	0.2XVDD	V
Operation current for VDD	IDD	-	-	215	mA

Pin Map

Pin Index	Pin Name	Description
1	3V3
2	TX
3	RX
4	-
5	RST#	Enable wee module to reset in low level
6	-
7	FW	Firmware enable pin*
8	-
9	-
10	GND
11	-
12	-
13	-
14	-
15	-
16	-
17	IO4
18	IO3
19	IO2
20	IO1

Note: Firmware enable pin

• When set to 0, reset the wee module and enable the firmware uploading mode;
• When set to 1, reset the wee module and enable the normal work mode

Instruction

AT Commands