Wboard Pro

From ITEAD Wiki
Revision as of 03:45, 8 June 2016 by ITead (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Overview

IM141125005 3.jpg

WBoard Pro is a Wifi development board based on Arduino MEGA. With a on-board ESP8266 chip (wifi firmware has been burnt in), you can drive ESP8266 to connect wifi and visit the internet by controlling the serial ports. WBoard Pro supports IoTgo Arduino Library to do a rapid development.

Go shopping Wboard Pro(IM141125005)

Features

  • Standard Bee interface, nRF24L01+ interface, SD card slot, PWR/Test indicator
  • On-board ESP8266 chip, support wifi connect to internet
  • With 40-pin interface that compatiable with Raspberry Pi B+, can use most of the Raspberry Pi add-ons
  • Designed to fit an enclosure

Specification

PCB Size 90 x 60 x 1.6mm
Interface Standard Bee interface, nRF24L01+ interface, uSD,uUSB
Indicator PWR, Test

Electrical Characteristics

Characteristics Symbol Min Typ Max Unit
Power supply voltage Vsupply 7 - 23 V
Power for system VDD 3.0 3.3 3.6 V
High input voltage VIH 0.8XVDD - VDD V
Low input voltage VIL 0 - 0.2XVDD V
Operation current for VDD IDD - - 300 mA

Hardware

IM141125005-Dimension.jpg

IM141125005-pic.jpg

NOTE:

  • J3
When jumpers connect both 2-4 and 1-3, CP2102 will connect to Mega2560’s UART0.
When jumpers connect both 4-6 and 3-5, CP2102 will connect to ESP8266’s UART0.
  • FW
Connect ESP8266’s GPIO0 to GND. If you want to burn the firmware into ESP8266, you should plug a jumper in FW. After reset ESP8266, you can start to burn the firmware into ESP8266.
  • E-RESET
Hard reset for ESP8266. Besides, ESP8266 RST pin connects to Mega2560 PC0 (Arduino D37). If you set PC0 pin low level, you can make a soft reset on ESP8266.

Pin Map

Number name Mega 2560 pin name Aduino pin number
1 3V3    
2 5V    
3 IIC-SDA PD0 D20
4 5V    
5 IIC-SCL PD1 D21
6 GND    
7 GPIO0 PF0 A0
8 TXD2 PH1 D16
9 GND    
10 RXD2 PH0 D17
11 GPIO1 PF1 A1
12 GPIO2 PF2 A2
13 GPIO3 PF3 A3
14 GND    
15 GPIO4 PF4 A4
16 GPIO5 PF5 A5
17 3V3    
18 GPIO6 PF6 A6
19 SPI-MOSI PB2 D51
20 GND    
21 SPI-MISO PB3 D50
22 CS PG1 D40
23 SPI-SCK PB1 D52
24 SPI-NSS PB0 D53
25 GND    
26 GPIO7 PF7 A7
27 GPIO8 PK0 A8
28 GPIO9 PK1 A9
29 GPIO10 PK2 A10
30 GND    
31 GPIO11 PK3 A11
32 GPIO12 PK4 A12
33 GPIO13 PK5 A13
34 GND    
35 GPIO14 PK6 A14
36 GPIO15 PK7 A15
37 RST PG0 D41
38 WR PG2 D39
39 GND    
40 RS PD7 D38

Instruction

Reference: AT Commands: http://wiki.iteadstudio.com/ESP8266_Serial_WIFI_Module

Download

Schematic--File:IM141125005-WBoardPro-1.0-Schematic.pdf

Useful links

Firmware Update Tutorial: https://www.itead.cc/blog/esp8266-firmware-update-general-tutorial