Difference between revisions of "WIFI SHIELD REV2"

From ITEAD Wiki
Jump to: navigation, search
(Hardware)
(Pinmap)
Line 36: Line 36:
  
 
==Pinmap==
 
==Pinmap==
 +
 +
===Micro SD Socket===
 +
{| class="wikitable"
 +
|-
 +
| align="center" style="background:#f0f0f0;"|'''Index of Interface'''
 +
| align="center" style="background:#f0f0f0;"|'''Name of Interface'''
 +
| align="center" style="background:#f0f0f0;"|'''Index of Arduino'''
 +
|-
 +
| 1||SD_CS||D10
 +
|-
 +
| 2||MOSI||D11
 +
|-
 +
| 3||3V3 ||-
 +
|-
 +
| 4||SCK||D13
 +
|-
 +
| 5||GND||-
 +
|-
 +
| 6||MISO||D12
 +
|}
 +
 +
===WIFI module Interface===
 +
{| class="wikitable"
 +
|-
 +
| align="center" style="background:#f0f0f0;"|'''Index of Interface '''
 +
| align="center" style="background:#f0f0f0;"|'''Name of Interface'''
 +
| align="center" style="background:#f0f0f0;"|'''Index of Arduino'''
 +
|-
 +
| 1||WIFI_RST||D9
 +
|-
 +
| Index of Interface ||Name of Interface||Description
 +
|-
 +
| 1||D-RX ||Upgrade firmware, UART input
 +
|-
 +
| 2||D-TX ||Upgrade firmware, UART output
 +
|-
 +
| 3||ERROR||Severe error of module, high level is valid.
 +
|-
 +
| 4||WPS||WPS function input, descending portion is valid. If VDD/2 is input at the pin when starting, the module will enter WEB SERVER.
 +
|-
 +
| 5||BOOT||Used in boot program, high level is valid.
 +
|-
 +
| 6||RTS||UART requests sending
 +
|-
 +
| 7||CTS||UART clears sending
 +
|}
  
 
==UART Multiplexer==
 
==UART Multiplexer==

Revision as of 08:36, 26 May 2014

Overview

WIFI Shield REV2 .jpg

WIFI Shield REV2 supports IEEE 802.11b/g/n wireless protocol standard and serial output, which integrates TCP / IP protocol stack internally. It is specifically designed for Arduino boards including Arduino UNO, MEGA and Leonardo, and it supports 3.3V or 5V operation level so it can work with more Arduino-compatible boards.

Specifications

PCB size 58.0mm X 56mm X 1.6mm
Operation level 3.3V or 5V
Indicator PWR

Electrical Characteristics

Parameter Min. Typical Max. Unit
Power voltage 3 3.3 3.6 VDC
Working current (VCC=3.3V) 0.5 15000 100000 uA
Maximum radio frequency input (with reference to input of 50Ω) - 10 - dB
Static withstand voltage - - 2000 V

Hardware

IM130903001_1.jpg

Pinmap

Micro SD Socket

Index of Interface Name of Interface Index of Arduino
1 SD_CS D10
2 MOSI D11
3 3V3 -
4 SCK D13
5 GND -
6 MISO D12

WIFI module Interface

Index of Interface Name of Interface Index of Arduino
1 WIFI_RST D9
Index of Interface Name of Interface Description
1 D-RX Upgrade firmware, UART input
2 D-TX Upgrade firmware, UART output
3 ERROR Severe error of module, high level is valid.
4 WPS WPS function input, descending portion is valid. If VDD/2 is input at the pin when starting, the module will enter WEB SERVER.
5 BOOT Used in boot program, high level is valid.
6 RTS UART requests sending
7 CTS UART clears sending

UART Multiplexer

Switch of operation level

Switch for transparent transmission

Indicator

  • PWR, 3.3V supply indicator: when supply is normal, PWR indicator will keep ON.

Button

  • WIFI_RST, WIFI resetting button: press the button to reset WIFI module.

Note

  • There is no existing library to support the module at present.

Download

Useful Links