W5100 Ethernet Shield V1.1

From ITEAD Wiki
Revision as of 10:47, 8 November 2015 by ITead (Talk | contribs)

Jump to: navigation, search

Overview

W5100 Ethernet shield V1.1 is a WIZnet W5100 breakout board with POE and Micro-SD designed for Arduino platform. 5V/3.3V compatible operation voltage level makes it compatible with Arduino boards, leafmaple, and other Arduino compatible boards except Mega boards.

Note: the POE of W5100 shield V1.1 is dummy POE. Because in the 100M ethernet wire, 7/8 pins are not used. It will be connected to VIN pin of arduino board directly.

Features

  • With Micro SD interface
  • 5V/3.3V double operational voltage level
  • 10Mb/100Mb Ethernet socket with POE
  • All electronic brick interface are broken out

Specifications

PCB size 68.6mm X 55.9mm X 1.6mm
Indicators TX,RX,COL,FEX,SPD,LNK
Power supply 5V
Communication Protocol SPI

Electrical Characteristics

Specification Min. Typ. Max Unit
Power voltage 3 - 5.5 VDC
Input Voltage VH: 3 - 5.5 V
Input Voltage VL: -0.3 - 0.5 V
Current Consumption - - 100 mA

Hardware

Installation

Indicator LED

Download