Difference between revisions of "W5100 Ethernet Network Module"

From ITEAD Wiki
Jump to: navigation, search
m (Overview)
m (Overview)
 
Line 5: Line 5:
 
It's a breakout board for  W5100 embedded TCP/IP chip. Included on the board is an RJ-45 with X’FMR connector. It can be used as a component and little effort is required to interface to the W5100. This module is an ideal option for users who want a simple solution to adding TCP/IP capability to their [[project]].
 
It's a breakout board for  W5100 embedded TCP/IP chip. Included on the board is an RJ-45 with X’FMR connector. It can be used as a component and little effort is required to interface to the W5100. This module is an ideal option for users who want a simple solution to adding TCP/IP capability to their [[project]].
  
To make this module to work with SD card module, please read this blog: [http://blog.iteadstudio.com/how-to-make-w5100-module-work-with-sd-card-module| How to Make W5100 Module Work with SD Card Module?]
+
To make this module to work with SD card module, please read this blog: [http://blog.iteadstudio.com/how-to-make-w5100-module-work-with-sd-card-module How to Make W5100 Module Work with SD Card Module?]
  
 
Go shopping [http://imall.iteadstudio.com/m120525007.html W5100 Ethernet Network Module (IM120525007)]
 
Go shopping [http://imall.iteadstudio.com/m120525007.html W5100 Ethernet Network Module (IM120525007)]

Latest revision as of 04:47, 31 December 2015

Overview

W5100 ETHERNET NETWORK MODULE.jpg

It's a breakout board for W5100 embedded TCP/IP chip. Included on the board is an RJ-45 with X’FMR connector. It can be used as a component and little effort is required to interface to the W5100. This module is an ideal option for users who want a simple solution to adding TCP/IP capability to their project.

To make this module to work with SD card module, please read this blog: How to Make W5100 Module Work with SD Card Module?

Go shopping W5100 Ethernet Network Module (IM120525007)

Features

  • Supports 10/100 Base TX
  • Supports half/full duplex operation
  • Supports auto-negotiation and auto cross-over detection
  • IEEE 802.3/802.3u Compliance
  • Operates 3.3V with 5V I/O signal tolerance
  • Supports network status indicator LEDs
  • Includes Hardware Internet protocols: TCP, IP Ver.4, UDP, ICMP, ARP, PPPoE, IGMP
  • Includes Hardware Ethernet protocols: DLC, MAC
  • Supports 4 independent connections simultaneously
  • Supports MCU bus Interface and SPI Interface
  • Supports Direct/Indirect mode bus access
  • Supports Socket API for easy application programming
  • Temperature : 0 ~ 70℃ (Operation), -40 ~ 85℃ (Storage)

Download

Datasheet for W5100

Schematic

Useful Links