NoticeDifference between revisions of "Tutorial"
From ITEAD Wiki
m (→Raspberry PI Add-on) |
m (→IBOX / Iteaduino Plus) |
||
| Line 3: | Line 3: | ||
* [[Install OS to SD Card]] | * [[Install OS to SD Card]] | ||
* [[Install OS to NAND Flash]] | * [[Install OS to NAND Flash]] | ||
| − | + | * [http://blog.iteadstudio.com/iteaduino-plus-work-with-oled-and-1602-dispaly/#more-2000 Iteaduino Plus Work with OLED And 1602 Dispaly] | |
| − | + | * [http://blog.iteadstudio.com/using-the-itead-a20-core-as-control-host-of-3d-printer/ Using The ITEAD A20 CORE AS Control Host Of 3D Printer] | |
| − | + | * [http://blog.iteadstudio.com/example-of-applying-itead-a20-core-with-rdm8800/ Example Of Applying ITEAD A20 CORE With RDM8800] | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
==Raspberry PI Add-on== | ==Raspberry PI Add-on== | ||
Revision as of 02:01, 24 May 2014
IBOX / Iteaduino Plus
- Install OS to SD Card
- Install OS to NAND Flash
- Iteaduino Plus Work with OLED And 1602 Dispaly
- Using The ITEAD A20 CORE AS Control Host Of 3D Printer
- Example Of Applying ITEAD A20 CORE With RDM8800
