Touch Sensor/Button Brick

From ITEAD Wiki
Revision as of 07:01, 27 May 2014 by Ivy (Talk | contribs)

Jump to: navigation, search

Overview

Touch button switch.jpg

Electronic brick of touch button switch is finger-sized, which can be connected to I/O port of main board or externally disconnected to check the switch state so as to control ON/OFF of LED lamp.

Features

1. Plug and play, easy to use. Compatible with the mainstream 2.54 interfaces and 4-Pin Grove interfaces in the market. IM120710023_2.jpg

2. With use of M4 standard fixed holes, compatible with M4-standard kits such as Lego and Makeblock. IM120710023_3.jpg

Specifications

PCBsize 38.0mmX24.0mmX1.6mm
Workingvoltage 3.3or5VDC
Operatingvoltage 3.3or5VDC
Compatibleinterfaces 2.543-pininterfaceand4-pinGroveinterface (1)

Note 1: S for digital output port, N for not used pin, V and G for voltage at the common collector and ground respectively. When there is no operation, digital output is VDD; when the button is pressed down, the digital output is 0V.

Electrical Characteristics

Electrical characteristics Min. Typical Max. Unit
Supply voltage 2 3 5.5 VDC
Working current(VCC=5V) - 18 - uA
Digital output voltage(VCC=5V) 0 - 5 V

Hardware

Demo

Download

Useful Links