NoticeDifference between revisions of "Tilt Sensor/Switch Brick"
From ITEAD Wiki
(→Overview) |
(→Features) |
||
| Line 5: | Line 5: | ||
==Features== | ==Features== | ||
| + | 1. Plug and play, easy to use. Compatible with the mainstream 2.54 interfaces and 4-Pin Grove interfaces in the market. | ||
| + | http://imall.iteadstudio.com/media/wysiwyg/Products/ElectronicBrick/IM120710019_2.jpg | ||
| + | |||
| + | 2. With use of M4 standard fixed holes, compatible with M4-standard kits such as Lego and Makeblock. | ||
| + | http://imall.iteadstudio.com/media/wysiwyg/Products/ElectronicBrick/IM120710019_3.jpg | ||
==Specifications== | ==Specifications== | ||
Revision as of 05:58, 27 May 2014
Contents
Overview
Electronic brick of tilt switch can be connected to analog I/O port and used in tilt sensor for smart car or robot. When the sensor is in the horizontal position, the output is high level; when the sensor rotates counterclockwise to form an angle of more than 15 ° with the horizontal line, the output is low level.
Features
1. Plug and play, easy to use. Compatible with the mainstream 2.54 interfaces and 4-Pin Grove interfaces in the market.
2. With use of M4 standard fixed holes, compatible with M4-standard kits such as Lego and Makeblock.
