Stackable SD Card shield V3.0

From ITEAD Wiki
Revision as of 08:01, 20 June 2014 by Ivy (Talk | contribs)

Jump to: navigation, search


Stakable SD Card shield V3.0.jpg

SD Shield 3.0 is a break out board for standard SD and TF card. It is compatible with 5V and 3.3V Arduino mainboards, Arduino-compatible boards and Arduino mainboards that SPI is on ICSP instead on pin D11~13 such as Leonardo.

Go shopping Stackable SD Card shield V3.0 (IM120417007)

Basic features

  • Arduino compatible
  • Supports both SD card and TF card
  • Stackable
  • Compatible with 5V and 3.3V Arduino mainboards


PCB size 56.15mm X56.23mm X 1.6mm
Operating voltage 3.3V/5V DC
Indicator PWR
Communication interface UART,IIC,SPI
Electronic brick interface Grove 4pin

Electrical characteristics

Parameter Min. Typical Max. Unit
Supply voltage 3 - 5.5 VDC
Operating level - 3.3/5 - V
Consumption current - - 100 mA


Stakable SD Card shield V3.0-1.jpg



Useful Links