All translations

Jump to: navigation, search

Enter a message name below to show all available translations.

Message

Found 2 translations.

NameCurrent message text
 h English (en)==Instruction==
*Plug Rpi Arduino [[Shield]] Add-on into RPI V2, connect SHT10 to IIC interface through 4-pin wires. Power Raspberry Pi V2.
*[[Download]] the SDK from this link: https://github.com/iteadsw/SDK and then install it.
*Modify the file ReadSHT1xValues.ino
: modified codes as below:
::define dataPin 3
::define clockPin 5
*Enter into the directory '''libraries/itead_SHT1x/examples/ReadSHT1xValues''', compile and run the file '''ReadSHT1xValues.ino'''
:Command as below to compile ReadSHT1xValues.ino
::$ iteadcompile ReadSHT1xValues ReadSHT1xValues.ino
:Command to run this program
::$ sudo ./ ReadSHT1xValues
*When the compilation is done, you can read the temperature and humidity data from the terminal.
 h Chinese (China) (zh-cn)==使用说明==
*将RpiArduinoShieldAddon插到RPI V2上面,将SHT10通过电子积木4pin连线接到IIC电子积木接口上,上电。
*从https://github.com/itead/SDK 下载SDK并安装。
*修改文件 ReadSHT1xValues.ino
: 修改后的编码如下:
::define dataPin 3
::define clockPin 5
*进入目录 '''libraries/itead_SHT1x/examples/ReadSHT1xValues''', 编译运行 '''ReadSHT1xValues.ino'''
:编译ReadSHT1xValues.ino的指令如下
::$ iteadcompile ReadSHT1xValues ReadSHT1xValues.ino
:运行指令如下
::$ sudo ./ ReadSHT1xValues
*最后可以从终端上读到传感器传回的温湿度值