Sonoff TH

From ITEAD Wiki
Revision as of 02:49, 14 March 2016 by ITead (Talk | contribs)

Jump to: navigation, search

Overview

Sonoff TH(Temperature Humidity) is a Sonoff version that can check and set temperature and humidity through the APP. It supports preset a temperature and humidity range, when the temperature and humidity of the environment has reached the range, it will automatically turn on or turn off connected devices. This module is perfect to connect with electric fan, air conditioner, humidifier. Please note that this version does not have 433 RF function.

Sonoff is a low-cost, affordable device that help you to step into the amazing smart home.It is a WiFi wireless switch that can connect to appliance of different types and brands. Sonoff sends data to cloud platform through the WiFi Router, which enables you to remotely control all connected appliances with the App eWeLink on your smart phone. The server of Sonoff is Amazon AWS global server.

Go shopping Sonoff TH (SKU:)

Features

  • Support 90~250V AC power supply voltage.
  • Support checking real time temperature and humidity.
  • Support preset temperature and humidity to turn on/off devices.
  • Support fast configure SSID and password through APP.
  • Support automatic connect to server, register and update status info.
  • Support tracking device status and timely remote control through APP.
  • Support setting single and repeat timing tasks.

WIFI Characteristics

• 802.11 b / g / n

• Built-in Tensilica L106 ultra-low power consumption 32-bit micro-MCU, dominant frequency support 80 MHz and 160 MHz, support RTOS

• Built-in TCP / IP protocol stack

• Built-in TR switch, balun, LNA, power amplifier and matching network

• Built-in PLL, voltage regulator and power supply management components, 802.11b mode +20 dBm output power

• A-MPDU&A-MSDU aggregation and 0.4μs guard interval

• WiFi @ 2.4 GHz, supports WPA / WPA2 safe mode

• Support cloud OTA upgrade

• Support STA / AP / STA + AP mode

• UART, I2C, PWM, GPIO

• Deep sleep maintain current is 10 uA, shutdown current is less than 5 uA

• Wake-up, connect and transfer data packets in 2 ms

• Standby power consumption is less than 1.0 mW (DTIM3)

• Operating temperature range: -40 ℃ - 125 ℃

• Other parameters as follows

Category Parameters Description
Wireless Parameter Wireless standard 802.11 b/g/n
Frequency range 2.4GHz-2.5GHz (2400M-2483.5M)
Hardware Parameter Data port UART/I2C
GPIO/PWM
Operating voltage 3.0~3.6V(recommend 3.3V)
Operating current Average: 80mA
Operating temperature -40°~125°
Storage temperature Room temperature
Package size 65mm*34mm*16mm
Software Parameter Wireless network mode station/softAP/SoftAP+station
Security mechanism WPA/WPA2
Encryption type WEP/TKIP/AES
Firmware upgration Local serial programming/Cloud Upgrade/Host download programming
Software development Support secondary development
Network protocols IPv4, TCP/UDP/HTTP/FTP
User configuration cloud server, Android/iOS APP

Specification

PCB Size 65X34X1.2mm
Interface DHT11
Indicator LED WiFi

Electrical Characteristics

Characteristics Symbol Min Typ Max Unit
Power supply voltage AC 90 - 250 V
Power supply voltage for VDD VDD 3.0 3.3 3.6 V
Operation current for VDD IDD - - 290 mA

Hardware

Sonoff TH-Hardware.png

Pin Map

Pin Index Pin Name Description
1 DHT11 Temp.&Hum sensor pin
2 GND GND
3 TX TX
4 RX RX
5 3V3 WIFI power supply

Downloads

File:Sonoff TH dimension.pdf

File:Sonoff TH Schematic.pdf

File:Sonoff TH view.pdf

Useful Links

User Manual for Sonoff and Slampher