Difference between revisions of "Sonoff TH"

From ITEAD Wiki
Jump to: navigation, search
m (Features)
m (WIFI Characteristics)
Line 22: Line 22:
  
 
==WIFI Characteristics==
 
==WIFI Characteristics==
 +
• 802.11 b / g / n
 +
 +
• Built-in Tensilica L106 ultra-low power consumption 32-bit micro-MCU, dominant frequency support 80 MHz and 160 MHz, support RTOS
 +
 +
• Built-in TCP / IP protocol stack
 +
 +
• Built-in TR switch, balun, LNA, power amplifier and matching network
 +
 +
• Built-in PLL, voltage regulator and power supply management components, 802.11b mode +20 dBm output power
 +
 +
• A-MPDU&A-MSDU aggregation and 0.4μs guard interval 
 +
 +
• WiFi @ 2.4 GHz, supports WPA / WPA2 safe mode
 +
 +
• Support cloud OTA upgrade
 +
 +
• Support STA / AP / STA + AP mode
 +
 +
• UART, I2C, PWM, GPIO
 +
 +
• Deep sleep maintain current is 10 uA, shutdown current is less than 5 uA
 +
 +
• Wake-up, connect and transfer data packets in 2 ms
 +
 +
• Standby power consumption is less than 1.0 mW (DTIM3)
 +
 +
• Operating temperature range: -40 ℃ - 125 ℃
 +
 +
• Other parameters as follows
 +
 
==Specification==
 
==Specification==
 
==Electrical Characteristics==
 
==Electrical Characteristics==

Revision as of 06:45, 22 February 2016

Overview

Sonoff TH(Temperature Humidity) is a Sonoff version that can check and set temperature and humidity through the APP. It supports preset a temperature and humidity to turn on or turn off connected devices. This module is perfect to connect with electric fan, air conditioner,humidifier. Please note that this version does not have 433 RF function.

Sonoff is a low-cost, affordable device that help you to step into the amazing smart home.It is a WiFi wireless switch that can connect to appliance of different types and brands. Sonoff sends data to cloud platform through the WiFi Router, which enables you to remotely control all connected appliances with the App eWeLink on your smart phone. The server of Sonoff is Amazon AWS global server.

Go shopping Sonoff TH (SKU:)

Features

  • Support 90~250V AC power supply voltage.
  • Support checking real time temperature and humidity.
  • Support preset temperature and humidity to turn on/off devices.
  • Support fast configure SSID and password through APP.
  • Support automatic connect to server, register and update status info.
  • Support tracking device status and timely remote control through APP.
  • Support setting single and repeat timing tasks.

WIFI Characteristics

• 802.11 b / g / n

• Built-in Tensilica L106 ultra-low power consumption 32-bit micro-MCU, dominant frequency support 80 MHz and 160 MHz, support RTOS

• Built-in TCP / IP protocol stack

• Built-in TR switch, balun, LNA, power amplifier and matching network

• Built-in PLL, voltage regulator and power supply management components, 802.11b mode +20 dBm output power

• A-MPDU&A-MSDU aggregation and 0.4μs guard interval

• WiFi @ 2.4 GHz, supports WPA / WPA2 safe mode

• Support cloud OTA upgrade

• Support STA / AP / STA + AP mode

• UART, I2C, PWM, GPIO

• Deep sleep maintain current is 10 uA, shutdown current is less than 5 uA

• Wake-up, connect and transfer data packets in 2 ms

• Standby power consumption is less than 1.0 mW (DTIM3)

• Operating temperature range: -40 ℃ - 125 ℃

• Other parameters as follows

Specification

Electrical Characteristics

Hardware

Pin Map

Downloads

Useful Links