Difference between revisions of "Sonoff RF Bridge 433"

From ITEAD Wiki
Jump to: navigation, search
m (Useful Links)
m (Downloads)
Line 112: Line 112:
 
==Downloads==
 
==Downloads==
 
[[:File:Sonoff_RF_Bridge_433_Schematic.SCH.pdf | Sonoff RF Bridge 433 Schematic]]
 
[[:File:Sonoff_RF_Bridge_433_Schematic.SCH.pdf | Sonoff RF Bridge 433 Schematic]]
 +
 +
[[:File:RF万能收发模块串口协议_v1.0.pdf | RF万能收发模块串口协议_v1.0]]
  
 
==Useful Links==
 
==Useful Links==

Revision as of 06:52, 4 July 2017

Overview

Sonoff RF Bridge 433 is an ultra low power consumption device that can convert 433.92MHz (433MHz) to WiFi. It's a bridge between 433MHz RF and WiFi, which can be added to iOS & Android App eWeLink. Users can firstly pair 433MHz devices with the RF Remote, then add their RF Remote to the App. Therefore, users can control the 433MHz devices through App eWeLink. It's specially designed for mobile device and IoT application.


RF Bridge Map.png

From the picture, you can see the relations among the devices clearly. Firstly, you pair the 433MHz RF Remote controller with 433MHz device. Secondly, you add RF Bridge to App eWeLink. Thirdly, add the 433MHz RF Remote controller to RF Bridge via App, pair the buttons one by one. Then you can press the button on the App to turn on/off the 433MHz device remotely. One RF Bridge supports to add up to 4 RF Remote controllers.

You can add not only 1-4 buttons ordinary RF Remote to the RF Bridge on App, but also curtain RF Remote and Alarm.


Go shopping Sonoff RF Bridge 433 (SKU:IM170619001)

WIFI 2.4G Characteristics

  • Support wireless 802.11 b/g/n/d/e/i/k/r standard
  • Support STA/AP/STA+AP working modes
  • Support WPA/WPA2, PSK and WP
  • Built-in TCP/IP protocol stack
  • Support multi-channel TCP client connection
  • Support Wi-Fi Direct (P2P)
  • Multi-queue management, make full use of 802.11e-compliant QoS priority
  • Adaptive rate fallback algorithm sets the optimum transmission rate and Tx power based on actual SNR and packet loss information.


433.92MHz Wireless Characteristics

  • Complete monolithic UHF receive/transmit
  • Receive & transmit frequency: 433.92MHz
  • Receive sensitivity: -107dBm
  • Up to 10dBm transmit power
  • Transmission rate: 10kbps
  • Autotune without manual adjustment
  • Ultra low RF antenna radiation


Electrical Characteristics

The device is powered by micro USB cable, and it supplies power to the system through 3.3V LDO chip.

Rated Parameters

Power supply Micro USB:+5V
System:3.6V
I/O voltage VSS - 0.3 ~ VDD + 0.3
Node Temp. +150℃
Storage Temp. -40℃ ~ +125℃
Operating Temp. -40℃ ~ +125℃
Soldering Temp. 260℃

Technical Parameters

Name Type Description
Chip ESP8285,EFM8BB1
Wi-Fi Wireless Standard IEEE 802.11b/g/n/d/e/i/k/r
Frequency 2.412GHz-2.484GHz
Transmit Power 802.11b: +20±2dBm (@11Mbps)
802.11g: +17±2dBm (@54Mbps)
802.11g: +14±2dBm (@HT20,MCS7)
Receiving Sensitivity 802.11b: -91 dBm (@11Mbps ,CCK)
802.11g: -75 dBm (@54Mbps, OFDM)
802.11n: -72 dBm (MCS7)
Antenna 2.4G onboard antenna
433.92M Working Frequency 433.92MHz
Demodulation Bandwidth 5000Hz
Transmit Power Transmitting mode: 12.5mA
Idle mode: 3mA
Standby mode: 1uA
Receive Current Continuous receiving mode: 3.9 ~ 4.5mA
Idle mode: 390uA
Standby mode: 0.9uA
Hardware Operating Voltage 3.0 ~ 3.6V
GPIO drive of main chip Max:12mA(ESP8285),12.5mA(EFM8BB1)
Operating Current Continue sending:70~200mA
Normal working:30~200mA
Stand-by mode:<200uA

Hardware

Rf bridge 433 hardware.png


Downloads

Sonoff RF Bridge 433 Schematic

RF万能收发模块串口协议_v1.0

Useful Links

User Manual in English

中文操作说明书

Wi-Fi Socket/Switch Fail to be Controlled Troubleshooting

Features wanted, bug report and discuss in Itead Smart Home Forum