Sonoff DEV

From ITEAD Wiki
Revision as of 08:28, 13 April 2016 by ITead (Talk | contribs)

Jump to: navigation, search

Overview

Sonoff-DEV (5).JPG

Sonoff DEV(short for Sonoff development board) is a universal low-cost WiFi development board designed by ITEAD. With only one micro USB cable to connect to PC, users can start to develop and design IoT device right away. Sonoff DEV supports to program personal firmwares. The core processor of this board is ESP8266. As we all know that ESP8266 module has integrated built-in Tensilica L106 ultra-low power consumption 32 bit micro-MCU, on-board antenna, dominant frequency support 80 MHz and 160 MHz, support RTOS.

Sonoff DEV supports standard IEEE802.11 b/g/n protocol, TCP/IP protocol stack. Users can use this module to add network function to devices or use it to build independent network controller. ESP8266 is high-performance wireless SOC, which provides WiFi to other systems with lowest cost.

Go shopping Sonoff DEV(Coming Soon)

Sonoff-DEV-Structure.jpg

Sonoff DEV Structure

Features

  • Support Arduino IDE Programming
  • 802.11 b/g/n
  • WIFI @2.4 GHz,support WPA/WPA2 safe mode
  • Built-in 10 bit high accuracy ADC
  • Built-in TCP/IP protocol stack
  • Built-in switch, balun, LNA, power amplifier and matching network
  • Built-in PLL, voltage stabilizer and power management components
  • 802.11b mode + 20 dBm output power
  • Support antenna diversity
  • 10uA deep sleep maintain current, less than 5 uA shutdown current
  • Built-in 32-bit lower power CUP
  • SDIO 2.0, SPI, UART
  • STBC, 1x1 MIMO, 2x1 MIMO
  • A-MPDU&A-MSDU aggregation and 0.4us guard interval
  • Wake-up, connect and transfer data packets in 2 ms
  • Standby power consumption: <1.0mW (DTIM3)
  • Temp range:-40 ~ 80℃

Specification

Category Parameters Explanation
Radio parameters Wireless Standard 802.11 b/g/n
Frequency Range 2.4G-25G(2400M-2483.5M)
Transmitting power 802.11b: 20dBm
802.11g: 17dBm
802.11n: 14dBm
Receiving sensitivity 802.11b: (11Mbps)-91dbm
802.11g: (54Mbps)-75dbm
802.11n: (MCS7)-72dbm
Hardware parameters Data access UART/I2C/
GPIO/PWM
Operating Voltage 3.0~3.6V(Suggested 3.3V)
Operating current Average: 80mA
Operating temperature -40℃~80℃
Storage temperature Room temperature
Size 50mm*50mm
Software parameters Wireless Network Mode Station/softAP/SoftAP+station
Security Mechanism WPA/WPA2
Encryption Type WEP/TKIP/AES
Upgrading firmware Local serial programming / Cloud Upgrade
Network protocol IPv4, TCP/UDP/HTTP/FTP
User Profiles AT + instruction set

Electrical Characteristics

Hardware

PIN MAP

Programming Instruction

Download

Useful link