Sonoff 4CH

From ITEAD Wiki
Revision as of 10:43, 5 July 2017 by ITead (Talk | contribs)

Jump to: navigation, search

Overview

Sonoff 4CH 06.jpg

Sonoff 4CH is an ESP8285 WiFi module based 4 channel (4-way) WiFi wireless switch. Sonoff 4CH supports to connect and control 4 home appliances, which can be turned on/off separately by the buttons or iOS and Android APP EweLink.Owning a Sonoff 4CH means you have 4 Sonoff basic WiFi switches integrate together.

The enclosure supports din-rail mount! A DIN rail is a metal rail of a standard type widely used for mounting circuit breakers and industrial control equipment inside equipment racks. These products are typically made from cold rolled carbon steel sheet with a zinc-plated or chromated bright surface finish.

Sonoff 4CH belongs to Sonoff family, definitely, it bears all the functions basic Sonoff has. In EweLink, you can remote turn on/off from anywhere at any time, set single/repeat/countdown timing schedules to turn on/off at a specified time, share to others so that they can control together.

Sonoff 4CH is hacker-friendly! You can flash external firmware!

Go shopping Sonoff 4CH(SKU:IM160913003)

Features

  • Support independently turn on/off 4 home appliances
  • Support to control home appliances by local toggle buttons or APP
  • Support tracking device status and timely remote control through APP
  • Support countdown timing and schedule timing
  • Support one-key sharing device to other user

Electrical Characteristics

  • Voltage range: 90-250v AC(50/60Hz)
  • Max current: 10A
  • Max Power: 2200W
  • Humidity: 5%-95%
  • Wireless Frequency: 2.4Ghz
  • Working Temp: ﹣20℃-75℃
  • Max soldering temperature: 260℃

Wiring Instruction

Sonoff-4CH.jpg

L-In: Input LIVE

Button of CH1 is also WiFi pairing button. Press and hold it until LED flash into pairing state.

L1,L2,L3,L4 port respectively connects to LIVE of channel 1, channel 2, channel 3, channel 4.

You can randomly connects to any of the five N port and 5 GND port for your device.

WIFI Characteristics

• 802.11 b/g/n

• Built-in Tensilica L106 ultra-low power consumption 32-bit micro-MCU, dominant frequency support 80 MHz and 160 MHz, support RTOS

• Built-in TCP/IP protocol stack

• Built-in TR switch, balun, LNA, power amplifier and matching network

• Built-in PLL, voltage regulator and power supply management components, 802.11b mode +20 dBm output power

• A-MPDU&A-MSDU aggregation and 0.4μs guard interval

• WiFi @ 2.4 GHz, supports WPA / WPA2 safe mode

• Support cloud OTA upgrade

• Support STA/AP/STA + AP mode

• Standby power consumption is less than 1.0 mW (DTIM3)

• Other parameters are as follows

Category Parameters Description
Wireless Parameter Wireless standard 802.11 b/g/n
Frequency range 2.4GHz-2.5GHz (2400M-2483.5M)
Hardware Parameter Data port UART/I2C
GPIO/PWM
Operating voltage 3.0~3.6V(recommend 3.3V)
Operating current Average: 80mA
Operating temperature 0ºC-40ºC(32°F-104°F)
Operating Humidity 5%-90%RH, Non-condensing
PCBA size 122.2*87.2*1.2mm
Software Parameter Wireless network mode station/softAP/SoftAP+station
Security mechanism WPA/WPA2
Encryption type WEP/TKIP/AES
Firmware upgration Local serial programming/Cloud Upgrade/Host download programming
Software development Support secondary development
Network protocols IPv4, TCP/UDP/HTTP/FTP
User configuration cloud server, Android/iOS APP

Specification

PCBA Size:122.2*87.2*1.2mm

Product Size: (L)14.5*(W)9.5*(H)4cm

Hardware

Sonoff 4CH hardware.png

Download

Sonoff 4CH Schematic

Sonoff 4CH PCB

0A-ESP8285__Datasheet_CN

0A-ESP8285_Datasheet_EN

RoHS Test Report for Sonoff 4CH & 4CH Pro

FCC Certificate for Sonoff 4CH & 4CH Pro

FCC Test Report for Sonoff 4CH & 4CH Pro

CE Certificate and Reports for Sonoff 4CH and Sonoff 4CH Pro:

CE-EMC

CE-EMF

CE-LVD

CE-RED

CE-RF

Useful Links

User Manual for Sonoff 4CH

Wi-Fi Socket/Switch Fail to be Controlled Troubleshooting

Features wanted, bug report and discuss in Itead Smart Home Forum