SPD8001

From ITEAD Wiki
Revision as of 03:35, 28 October 2014 by ITead (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Overview

IM141020002pic3.jpg

In the PoE scheme, two different types of devices are involved: Power Sourcing Equipment (PSE) and Powered Devices (PD). Compatible with IEEE802.3af standard, SPD8001 is an isolation type PD module for PoE system so that the electric energy can pass from PSE to SPD8001 module though Ethernet cable.

With multiple protecting functions such as over current, input under voltage and over temperature, this module provides a stable and reliable PoE solution for you.

Go shopping SPD8001(IM141020002)

Features

  • Compatible with IEEE802.3af standard
  • Support 10M/100M/1000M power on Ethernet system
  • Support End-point and Mid-span modes
  • Support PoE power management from class 0 to class 3
  • Under Voltage Protection, Over Temperature Protection, Surge Protection
  • Isolation Voltage 1.5KV rms

Application Notes

  • NVR
  • NAS
  • VolP Phone
  • IP Camera
  • RFID system
  • Entrance Surveillance System
  • 100M/1000M Ethernet gateway/router
  • WiMAX ASN/BTS and CPE/ODU system

Electronic Characteristics

Test Conditions Min Typical Max Unit
VPORT_Max VA1/VA2 pin or VB1/VB2 pin -60 +60 V
VPORT VA1/VA2 pin or VB1/VB2 pin(ABS) 36 57 V
VPORT_UVLO Shut down 42 V
Open 30 36
IPORT Class 0 0 &minus 4 mA
Class 1 9 - 12
Class 2 17 - 20
Class 3 26 - 30
ILIM Impulse Current 140 mA
Limited Current 470 680 mA
ISO_Volt 1.5 kVrms
Tss 3 mS
IOUT VOUT=12.0V 1 A
VOUT=5.0V 2 A
VOUT=3.3V 3 A
T_OP* 0 - 70
T_stroage -10 - 70
*Note: Customizable for industrial products (-40~85℃)

Hardware

IM141020002pic1.jpg

Pin Map

Number Pin description
1 VA1 PoE Mode A Positive Input
2 VA2 PoE Mode A Negative Input
3 VB1 PoE Mode B Negative Input
4 VB2 PoE Mode B Positive Input
5 CP1 RCL*
6 CP2 RCL*
7 GND
8 VOUT
9 VOUT
10 GND

∗Note: CP1/CP2 Resistance Type as below table

Power Type In Use Peak Power IPORT RCL(1%,1/16W)
0 Default 0.44 to 12.95W < 4mA >1.33k
1 Optional 0.44 to 3.84W 10.5mA 127Ω
2 Optional 3.84 to 6.49W 18.5mA 69.8Ω
3 Optional 6.49 to 12.95W 28mA 45.3Ω
4 POE+ 12.95 to 17W 40mA 30.9Ω

Related Product

Useful Link