Difference between revisions of "RepRap Arduino Mega Pololu Shield"

From ITEAD Wiki
Jump to: navigation, search
(Created page with "==Overview== thumb This is the bare PCB of RepRap Arduino Mega Pololu Shield. According to [http://reprap.org/wiki/Arduino_Mega_Po...")
 
(No difference)

Latest revision as of 08:52, 3 November 2014

Overview

Im130624002 1.jpg

This is the bare PCB of RepRap Arduino Mega Pololu Shield.

According to RepRap wiki about this shield. RepRap Arduino Mega Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.

Go shopping RepRap Arduino Mega Pololu Shield

Open Source Files

Eagle Files

Eagle Libraries

Schematic

Current schematic shown. For older versions click the image. Click again for full resolution. Arduinomegapololushieldschematic.png