NoticeDifference between revisions of "RPI Screws Prototype Add-on V1.0"
From ITEAD Wiki
(Created page with "==Overview== right Raspberry PI Screws Prototype Add-on extends all pin...") |
(No difference)
|
Latest revision as of 01:45, 15 July 2015
Overview
Raspberry PI Screws Prototype Add-on extends all pins of Raspberry Pi 2*13 pin connector out to 3.5mm pitch screw terminals.
It also has a lot of utilities provided by Arduino Protoshield, including a large prototyping space of both connected and unconnected 0.1-inch spaced through-holes.
Go shopping RASPBERRY PI SCREWS PROTOTYPE ADD-ON (IM131224001)
