RPI Screws Prototype Add-on V1.0

From ITEAD Wiki
Revision as of 01:45, 15 July 2015 by ITead (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Overview

Raspberry PI Screws Prototype Add-on.jpg

Raspberry PI Screws Prototype Add-on extends all pins of Raspberry Pi 2*13 pin connector out to 3.5mm pitch screw terminals.

It also has a lot of utilities provided by Arduino Protoshield, including a large prototyping space of both connected and unconnected 0.1-inch spaced through-holes.

Go shopping RASPBERRY PI SCREWS PROTOTYPE ADD-ON (IM131224001)

Retrieved from "https://wiki.iteadstudio.com/index.php?title=RPI_Screws_Prototype_Add-on_V1.0&oldid=3533"