Difference between revisions of "RPI SIM800 GSM/GPRS ADD-ON V2.0"

From ITEAD Wiki
Jump to: navigation, search
m (Pinmap)
m (Useful Link)
 
(12 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
==Overview==
 
==Overview==
[[File:IM150720001-Raspberry PI GSM Add-on V2.0 -2.jpg|thumb|400px|right]]
+
[[File:IM150720001-Raspberry PI GSM SIM800 Add-on V2.0 (8).jpg|thumb|400px|right]]
 
Raspberry PI SIM800 GSM/GPRS Add-on V2.0 is customized for Raspberry Pi interface based on SIM800 quad-band GSM/GPRS/BT module. AT commands can be sent via the serial port on Raspberry Pi, thus functions such as dialing and answering calls, sending and receiving messages and surfing on line can be realized. Moreover, the module supports powering-on and resetting via software.
 
Raspberry PI SIM800 GSM/GPRS Add-on V2.0 is customized for Raspberry Pi interface based on SIM800 quad-band GSM/GPRS/BT module. AT commands can be sent via the serial port on Raspberry Pi, thus functions such as dialing and answering calls, sending and receiving messages and surfing on line can be realized. Moreover, the module supports powering-on and resetting via software.
  
Line 118: Line 118:
  
 
==Indicators==
 
==Indicators==
 +
*PWR
 +
Power: When there is normal supply to the board, the indicator keeps on.
 +
 +
*8STATUS
 +
SIM800 status: When SIM800 works normally, the indicator keeps on.
 +
 +
*NET
 +
SIM800 network status: used to indicate network status, the working status of the indicator is as below:
 +
 +
{| class="wikitable"
 +
|-
 +
| align="center" style="background:#f0f0f0;"|'''Status'''
 +
| align="center" style="background:#f0f0f0;"|'''SIM800 behavior'''
 +
|-
 +
| OFF||SIM800 does not work
 +
|-
 +
| 64ms on/800ms off||SIM800 does not find network
 +
|-
 +
| 64ms on/3000ms off||SIM800 registers the network
 +
|-
 +
| 64ms on/300ms off||GPRS communicates
 +
|}
 +
 
==Keys==
 
==Keys==
 +
*PWRKEY
 +
SIM800 powering-on key: Keep pressing the key for more than 1 second, SIM800 will be powered on; keep pressing the key for more than 1 second after the board is powered on, SIM800 will be powered off.
 +
*RST
 +
SIM800 resetting key: press the key, SIM800 will be reset.
 +
 
==Extension==
 
==Extension==
 +
*External POWER IN
 +
If SIM800 will drop off while working, please connect a external at least 5V/2A power supply to this micro usb.
 +
*Upgrade Port
 +
This is only for upgrading firmware of SIM800.
 +
 
==Note==
 
==Note==
 +
The module does not support hot swapping.
 +
 
==Download==
 
==Download==
 +
*[[:File:IM150720001-Raspberry PI GSM Add-on V2.0-schematic.pdf]]
 +
*[[:File:SIM800_Series_AT_Command_Manual_V1.05.pdf]]
 +
*[[:File:SIM800 Series_Bluetooth_Application Note_V1.01.pdf]]
 +
 
==Useful Link==
 
==Useful Link==
 +
[ftp://imall.iteadstudio.com/Modules/IM131224002/Library_Raspberry_sim900.zip Library for RASPBERRY PI GSM ADD-ON V2.0]
 +
 +
[https://www.itead.cc/blog/raspberry-pi-3-add-on-supplementary-document Work with Raspberry PI 3 tutorial]

Latest revision as of 10:03, 28 June 2016

Overview

IM150720001-Raspberry PI GSM SIM800 Add-on V2.0 (8).jpg

Raspberry PI SIM800 GSM/GPRS Add-on V2.0 is customized for Raspberry Pi interface based on SIM800 quad-band GSM/GPRS/BT module. AT commands can be sent via the serial port on Raspberry Pi, thus functions such as dialing and answering calls, sending and receiving messages and surfing on line can be realized. Moreover, the module supports powering-on and resetting via software.

Go shopping RASPBERRY PI SIM800 GSM/GPRS ADD-ON V2.0(IMIM150720001)

Feature

  • Quad-Band 850/ 900/ 1800/ 1900 MHz
  • GPRS multislot class 12
  • Operation temperature: -40°C to +85 °C
  • Stackable

Specification

PCB size 85mm X 56mm X 1.6mm
Operation Level Digital 3.3V DC
Interface UART
Baud rate 9600(default)

Hardware

IM150720001-Raspberry PI GSM Add-on V2.0-dimension.png

Pinmap

Raspberry PI Pin N.O. Pin name Description
1 3.3V
2 5V
3 GPIO02 SDA
4 5V
5 GPIO03 SCL
6 GND
7 GPIO04
8 GPIO14 GSM_DIN
9 GND
10 GPIO15 GSM_DOUT
11 GPIO17 SIM800-PWRKEY
12 GPIO18 SIM800-RST
13 GPIO27
14 GND
15 GPIO22
16 GPIO23
17 3.3V
18 GPIO24
19 GPIO10 SPI_MOSI
20 GND
21 GPIO09 SPI_MISO
22 GPIO25
23 GPIO11 SPI_SCK
24 GPIO08 SPI_CE0
25 GND
26 GPIO07 SPI_CE1
27 ID_SD
28 ID_SC
29 GPIO05
30 GND
31 GPIO06
32 GPIO12
33 GPIO13
34 GND
35 GPIO19
36 GPIO16
37 GPIO26
38 GPIO20
39 GND
40 GPIO21

Indicators

  • PWR

Power: When there is normal supply to the board, the indicator keeps on.

  • 8STATUS

SIM800 status: When SIM800 works normally, the indicator keeps on.

  • NET

SIM800 network status: used to indicate network status, the working status of the indicator is as below:

Status SIM800 behavior
OFF SIM800 does not work
64ms on/800ms off SIM800 does not find network
64ms on/3000ms off SIM800 registers the network
64ms on/300ms off GPRS communicates

Keys

  • PWRKEY

SIM800 powering-on key: Keep pressing the key for more than 1 second, SIM800 will be powered on; keep pressing the key for more than 1 second after the board is powered on, SIM800 will be powered off.

  • RST

SIM800 resetting key: press the key, SIM800 will be reset.

Extension

  • External POWER IN

If SIM800 will drop off while working, please connect a external at least 5V/2A power supply to this micro usb.

  • Upgrade Port

This is only for upgrading firmware of SIM800.

Note

The module does not support hot swapping.

Download

Useful Link

Library for RASPBERRY PI GSM ADD-ON V2.0

Work with Raspberry PI 3 tutorial