Difference between revisions of "RPI GPS ADD-ON V1.0"

From ITEAD Wiki
Jump to: navigation, search
m (Overview)
m (Overview)
 
Line 2: Line 2:
  
 
[[File:Raspberry PI GPS Add-on.jpg|thumb|400px|right]]
 
[[File:Raspberry PI GPS Add-on.jpg|thumb|400px|right]]
[[RASPBERRY PI GPS ADD-ON V1.0|Raspberry PI GPS Add-on V1.0]] is customized for Raspberry Pi interface based on NEO-6 GPS module. Through the serial port on Raspberry Pi, data returned from NEO-6 module can be received, thus information such as the current location and time can be searched.
+
[[RASPBERRY PI GPS ADD-ON|Raspberry PI GPS Add-on]] is customized for Raspberry Pi interface based on NEO-6 GPS module. Through the serial port on Raspberry Pi, data returned from NEO-6 module can be received, thus information such as the current location and time can be searched.
  
 
Go shopping [http://imall.iteadstudio.com/raspberry-pi-gps-add-on-v1-0.html RASPBERRY PI GPS ADD-ON V1.0(IM131227001)]
 
Go shopping [http://imall.iteadstudio.com/raspberry-pi-gps-add-on-v1-0.html RASPBERRY PI GPS ADD-ON V1.0(IM131227001)]

Latest revision as of 07:05, 23 July 2015

Overview

Raspberry PI GPS Add-on.jpg

Raspberry PI GPS Add-on is customized for Raspberry Pi interface based on NEO-6 GPS module. Through the serial port on Raspberry Pi, data returned from NEO-6 module can be received, thus information such as the current location and time can be searched.

Go shopping RASPBERRY PI GPS ADD-ON V1.0(IM131227001)

Specifications

PCB size 58.5mm X 54.6mm X 1.6mm
Input voltage 3.3V
Interface UART
Baud rate 38400 (default)

Electrical characteristics

Parameters Min. Typical Max. Unit
Supply voltage - 3.3 3.6 VDC
Current consumption (average) - 40 - mA

Hardware

IM131227001.jpg

Pinmap

Raspberry PI interfaces

Raspberry PI Pin N.O. Pin name Pin of GPS Module Description
11 GPIO0 - Electronic brick interface
12 GPIO1 - Electronic brick interface
13 GPIO2 - Electronic brick interface
15 GPIO3 - Electronic brick interface
16 GPIO4 - Electronic brick interface
18 GPIO5 - Electronic brick interface
22 GPIO6 1PPS Pulse per second / Electronic brick interface
7 GPIO7 EXINT External interruption pin / Electronic brick interface
3 SDA0 - Electronic brick interface
5 SCL0 - Electronic brick interface
24 CE0 CS Chip selection for Micro SD card
26 CE1 - Electronic brick interface
19 MOSI MOSI Data input for Micro SD card
21 MISO MISO Data output for Micro SD card
23 SCLK SCLK Clock for Micro SD card
8 TXD GPS_RX Receiving end for SIM900 serial port
10 RXD GPS_TX Sending end for SIM900 serial port
2 +5V -
1 +3.3V -
6 GND -

Indicator

  • PWR

Power: When there is normal supply to the board, the power indicator keeps on.

Download

Datasheet for RASPBERRY PI GPS ADD-ON

Schematic for RASPBERRY PI GPS ADD-ON

Useful Links

This is a tutorial demonstrated how to use ITEAD RPI GPS Add-on with Raspberry Pi.