RPI Arduino Sheild Add-on V2.0

From ITEAD Wiki
Revision as of 02:48, 16 July 2015 by ITead (Talk | contribs)

Jump to: navigation, search

Introduction

IM150627002 (7).jpg

Compared to Arduino, it's hard to find the shields and electronic brick customized for Raspberry Pi. This Arduino Shield Add-on has extended RPI Connector to Arduino PIN, which will facilitate connections to all kinds of arduino shields. Meanwhile, two groups of electronic brick interfaces are equipped on the add-on, which are free to be connected to various electronic bricks.

Go shopping Raspberry Pi Arduino Shield Add-on V2.0 (im150627002)

Specification

PCB size 67mm X 65mm X 1.6mm
Operation Level Digital 3.3V DC
Power supply 5V DC

Hardware

IM150627002-RPI arduino shield add-on-dimension.png

Pinmap

Raspberry PI Pin N.O. Pin name Arduino Shield Description
1 3.3V 3.3V
2 5V 5V
3 GPIO02 A4 SDA
4 5V 5V
5 GPIO03 A5 SCL
6 GND GND
7 GPIO04 A0
8 GPIO14 D1 TXD
9 GND GND
10 GPIO15 D0 RXD
11 GPIO17 D2
12 GPIO18 D3
13 GPIO27 D5
14 GND GND
15 GPIO22 D6
16 GPIO23 D7
17 3.3V 3.3V
18 GPIO24 D8
19 GPIO10 D11 SPI_MOSI
20 GND GND
21 GPIO09 D12 SPI_MISO
22 GPIO25 D9
23 GPIO11 D13 SPI_SCK
24 GPIO08 D10 SPI_CE0
25 GND GND
26 GPIO07 D4 SPI_CE1
27 ID_SD
28 ID_SC
29 GPIO05 A1
30 GND GND
31 GPIO06 A2
32 GPIO12 A3
33 GPIO13 D14
34 GND GND
35 GPIO19 D16
36 GPIO16 D15
37 GPIO26 D19
38 GPIO20 D17
39 GND GND
40 GPIO21 D18

Download

File:IM150627002-RPI arduino shield add-on-schematic.pdf

File:IM150627002-RPI arduino shield add-on-view.pdf

File:IM150627002-RPI arduino shield add-on-dimension.pdf