Difference between revisions of "RASPBERRY PI SIM900 GSM/GPRS ADD-ON"

From ITEAD Wiki
Jump to: navigation, search
m (Useful Links)
m
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
==Overview==
+
{| class="FCK__ShowTableBorders" align="left"
 
+
[[File:RaspberryPIGSM Add-on .jpg|thumb|400px|right]]
+
Raspberry PI GSM Add-on is customized for Raspberry Pi interface based on SIM900 quad-band GSM/GPRS module. AT commands can be sent via the serial port on Raspberry Pi, thus functions such as dialing and answering calls, sending and receiving messages and surfing on line can be realized. Moreover, the module supports powering-on and resetting via software.
+
 
+
Go shopping [http://imall.iteadstudio.com/raspberry-pi-gsm-add-on.html RASPBERRY PI SIM900 GSM/GPRS ADD-ON (IM131224002)]
+
 
+
==Features==
+
* Quad-Band 850/ 900/ 1800/ 1900 MHz
+
* GPRS multi-slot class 10/8GPRS mobile station class B
+
* Compliant to GSM phase 2/2+Class 4 (2 W @850/ 900 MHz)
+
* Class 1 (1 W @ 1800/1900MHz)
+
* Control via AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands)
+
* Low power consumption: 1.5mA(sleep mode)
+
* Operation temperature: -40°C to +85 °C
+
 
+
==Specifications==
+
{| border="1"
+
 
+
| PCB size||73.8mm X 70mm X 1.6mm
+
 
|-
 
|-
| Input voltage||5V
+
| [[File:IM150720001-Raspberry PI GSM Add-on V2.0 (2)-pic.jpg|400px|Rasspberry Pi SIM800 GSM/GPRS Add-on V2.0]] <br>
 +
| [[File:RaspberryPIGSM Add-on .jpg|400px|Rasspberry Pi SIM900 GSM/GPRS Add-on V2.0]]<br>
 
|-
 
|-
| Interface||UART
+
| <div style="text-align: center">[[RPI SIM800 GSM/GPRS ADD-ON V2.0|RPI SIM800 GSM/GPRS ADD-ON V2.0(SKU:IM150720001)]]</div>
|-
+
| <div style="text-align: center">[[RPI SIM900 GSM/GPRS ADD-ON V1.0|RPI SIM900 GSM/GPRS ADD-ON V1.0(SKU:IM131224002)]]</div>
| Baud rate||9600 (default)
+
 
|}
 
|}
 +
<br clear="all">
  
==Electrical characteristics==
+
==V2.0 Change List==
{| class="wikitable"
+
* It is customized for Raspberry Pi interface based on SIM800 quad-band GSM/GPRS/BT module.
|-
+
| align="center" style="background:#f0f0f0;"|'''Parameter'''
+
| align="center" style="background:#f0f0f0;"|'''Min.'''
+
| align="center" style="background:#f0f0f0;"|'''Typical'''
+
| align="center" style="background:#f0f0f0;"|'''Max.'''
+
| align="center" style="background:#f0f0f0;"|'''Unit'''
+
|-
+
| Supply voltage||-||5||5.5||VDC
+
|-
+
| Current consumption (average)||-||500||-||mA
+
|-
+
| Instantaneous current consumption||-||-||2||A
+
|}
+
 
+
==Hardware==
+
http://imall.iteadstudio.com/media/wysiwyg/Products/Modules/IM131224002.jpg
+
 
+
==Pinmap==
+
 
+
===Raspberry PI interfaces===
+
{| class="wikitable"
+
|-
+
| align="center" style="background:#f0f0f0;"|'''Raspberry PI Pin N.O.'''
+
| align="center" style="background:#f0f0f0;"|'''Pin name'''
+
| align="center" style="background:#f0f0f0;"|'''Pin of SIM900 Module'''
+
| align="center" style="background:#f0f0f0;"|'''Description'''
+
|-
+
| 11||GPIO0||SIM900-PWERKEY||Powering-on key via software
+
|-
+
| 12||GPIO1||SIM900-RST||Resetting key via software
+
|-
+
| 13||GPIO2||-||
+
|-
+
| 15||GPIO3||-||
+
|-
+
| 16||GPIO4||-||
+
|-
+
| 18||GPIO5||-||
+
|-
+
| 22||GPIO6||-||
+
|-
+
| 7||GPIO7||-||
+
|-
+
| 3||SDA0||-||
+
|-
+
| 5||SCL0||-||
+
|-
+
| 24||CE0||-||
+
|-
+
| 26||CE1||-||
+
|-
+
| 19||MOSI||-||
+
|-
+
| 21||MISO||-||
+
|-
+
| 23||SCLK||-||
+
|-
+
| 8||TXD||SIM900_RX||Receiving end for SIM900 serial port
+
|-
+
| 10||RXD||SIM900_TX||Sending end for SIM900 serial port
+
|-
+
| 2||+5V||-||
+
|-
+
| 1||+3.3V||-||
+
|-
+
| 6||GND||-||
+
|}
+
 
+
===Other interfaces===
+
{| class="wikitable"
+
|-
+
| align="center" style="background:#f0f0f0;"|'''Pin name'''
+
| align="center" style="background:#f0f0f0;"|'''Description'''
+
|-
+
| DR||Receiving end for SIM900 debugging serial port
+
|-
+
| DT||Sending end for SIM900 debugging serial port
+
|-
+
| VBAT||SIM900 supply 4.2V
+
|-
+
| G||Ground
+
|-
+
| V||Electronic brick interface supply pin 3.3V
+
|}
+
 
+
==Indicators==
+
* PWR
+
Power: When there is normal supply to the board, the indicator keeps on.
+
* STATUS
+
SIM900 status: When SIM900 works normally, the indicator keeps on.
+
* NET
+
SIM900 network status: used to indicate network status, the working status of the indicator is as below:
+
{| class="wikitable"
+
|-
+
| align="center" style="background:#f0f0f0;"|'''Network indicator status'''
+
| align="center" style="background:#f0f0f0;"|'''SIM900 working status'''
+
|-
+
| OFF||SIM900 does not work
+
|-
+
| 64ms on/800ms off||SIM900 does not find network
+
|-
+
| 64ms on/3000ms off||SIM900 registers the network
+
|-
+
| 64ms on/300ms off||GPRS communicates
+
|}
+
 
+
==Keys==
+
* SIM900-PWRKEY
+
SIM900 powering-on key: Keep pressing the key for more than 1 second, SIM900 will be powered on; keep pressing the key for more than 1 second after the board is powered on, SIM900 will be powered off.
+
* SIM900-RST
+
SIM900 resetting key: press the key, SIM900 will be reset.
+
 
+
==Note==
+
The module does not support hot swapping.
+
 
+
==Download==
+
[ftp://imall.iteadstudio.com/Modules/IM131224002/DS_IM131224002.pdf Datasheet for RASPBERRY PI SIM900 GSM/GPRS ADD-ON]
+
 
+
[ftp://imall.iteadstudio.com/Modules/IM131224002/SCH_IM131224002.pdf Schematic for RASPBERRY PI SIM900 GSM/GPRS ADD-ON]
+
 
+
[ftp://imall.iteadstudio.com/Modules/IM131224002/Library_Raspberry_sim900.zip Library for RASPBERRY PI SIM900 GSM/GPRS ADD-ON]
+
 
+
==Useful Links==
+
:'''ML's Garret Labs:'''
+
*[https://garretlabs.wordpress.com/2014/05/21/raspberry-pi-a-remote-controlled-relay-using-sms-messages/ Raspberry PI: A remote controlled relay using SMS messages]
+
*[https://garretlabs.wordpress.com/2014/06/05/raspberry-and-the-remote-controlled-relay-a-low-level-approach-a-k-a-at-modem-commands-the-usual-suspects/ Raspberry and the remote controlled relay: a low-level approach (a.k.a. “AT modem commands: the usual suspects”).]
+
*[https://garretlabs.wordpress.com/2014/11/11/raspi-surv-a-raspberry-based-scalable-sms-remote-controlled-video-surveillance-system/ RasPI-Surv: a Raspberry-based scalable SMS remote controlled video surveillance system]
+

Latest revision as of 09:38, 30 July 2015

Rasspberry Pi SIM800 GSM/GPRS Add-on V2.0
Rasspberry Pi SIM900 GSM/GPRS Add-on V2.0


V2.0 Change List

  • It is customized for Raspberry Pi interface based on SIM800 quad-band GSM/GPRS/BT module.