RASPBERRY PI 2.8 TFT ADD-ON

From ITEAD Wiki
Revision as of 07:46, 21 May 2014 by Ivy (Talk | contribs)

Jump to: navigation, search

Overview

Raspberry PI 2.8 TFT Add-on.jpg

Raspberry PI 2.8 TFT Add-on is customized for Raspberry Pi based on 2.8 TFT LCD display module. The screen is driven based on an 8-bit data bus and a 4-bit ILI9323DS to control bus interface, which can display 263K colors. Module controls contents to be displayed via GPIO on Raspberry Pi. With touch function, it can be used to display the desktop of Raspberry Pi and realize clicking, touch and feedback.

Specifications

PCB size 72.0mm X 71mm X 1.6mm
Input voltage 3.3V
Screen size 2.8”
Resolution 240x320
Backlight LED
Color 262K
Driver chip ILI9325DS

Electrical characteristics

Parameter Min. Typical Max. Unit
Supply voltage - 3.3 3.6 VDC
Current consumed (average) - 20 40 mA
Input voltage VinH 3 3.3 3.6 V
Input voltage VinL -0.3 0 0.5 V
Output voltage VoutH 3 3.3 3.6 V
Output voltage VoutH -0.3 0 0.5 V

Hardware

IM140115001.jpg

Pinmap

Raspberry PI interfaces

Raspberry PI Pin N.O. Pin name Pin of 2.8 TFT
11 GPIO0 DB10
12 GPIO1 DB11
13 GPIO2 DB12
15 GPIO3 DB13
16 GPIO4 DB14
18 GPIO5 DB15
22 GPIO6 DB16
7 GPIO7 DB17
3 SDA0 RS
5 SCL0 WR
24 CE0 CS
26 CE1 RST
19 MOSI TOUCH_CLK
21 MISO TOUCH_CS
23 SCLK TOUCH_DIN
8 TXD TOUCH_DOUT
10 RXD TOUCH_IRQ
2 +5V -
1 +3.3V 3.3V
6 GND GND

Download

Datasheet for RASPBERRY PI 2.8 TFT ADD-ON

Schematic for RASPBERRY PI 2.8 TFT ADD-ON

Useful Links

notro's HitHub Page <Linux Framebuffer drivers for small TFT LCD display modules>