Moisture Sensor

From ITEAD Wiki
Revision as of 07:41, 27 May 2014 by Ivy (Talk | contribs)

Jump to: navigation, search

Overview

Soil moisture sensor.jpg

Electronic brick of soil moisture sensor is mainly used to detect the moisture content in the soil. The control board can get the moisture value or threshold in the soil via analog or digital pins.

Features

1. Plug and play, easy to use. Compatible with the mainstream 2.54 interfaces and 4-Pin Grove interfaces in the market.

IM121017001_2.jpg

2. With use of M4 standard fixed holes, compatible with M4-standard kits such as Lego and Makeblock.

IM121017001_3.jpg

3. With switch to shift between analog and digital output. Able to read the specific soil moisture information (analog) or the over-wet or over-dry soil information according to the threshold (digital). The adjustable potentiometer is used to set the moisture threshold.

IM121017001_4.jpg

4. With hysteresis comparator circuit for more stable digital output voltage.

IM121017001_5.jpg

Specifications

PCB size 71.65mm X 24.00mm X 1.6mm
Working voltage 3.3 or 5V DC
Operating voltage 3.3 or 5V DC
Compatible interfaces .54 3-pin interface and 4-pin Grove interface(1)(2)

Note 1: D for digital output port, A for analog output port, S for analog/digital output port ( defined according to the switch), V and G for voltage at the common collector and ground respectively

Note 2: When setting as analog output, output range is 0-3.3V or 0-5V according to the working voltage; when setting as digital output, output is 0/3.3V or 0/5V according to the working voltage.

Electrical Characteristics

Parameter Min. Typical Max. Unit
Working voltage 2.1 5 5.5 VDC
Analog output voltage(VCC=5V) 0 Vout 5 V
Digital output voltage(VCC=5V) 0 - 5 V
Working current(VCC=5V) - 5 - mA
Threshold hysteresis ΔUth - VCC*0.09 - V

Hardware

Switch and indicator

Demo

Download

Useful Links