MMA7361L Module

From ITEAD Wiki
Revision as of 08:11, 11 June 2014 by Ivy (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Overview

MMA7361L MODULE.jpg

This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and has a g-select input which switches the accelerometer between ±1.5g and ±6g measurement ranges. Other features include a sleep mode, signal conditioning, a 1-pole low pass filter, temperature compensation, self test, and 0g-detect which detects linear freefall. Zero-g offset and sensitivity are factory set and require no external devices.

Go shopping MMA7361L Module (IM120712010)

Features

  • Two selectable measuring ranges (±1.5g, ±6g)
  • Breadboard friendly - 0.1" pitch header
  • Low current consumption: 400 µASleep mode: 3 µA
  • Low voltage operation: 2.2 V - 3.6 V
  • High sensitivity (800 mV/g at 1.5g)
  • Fast turn on time (0.5 ms enable response time)
  • Self test for freefall detect diagnosis
  • 0g-Detect for freefall protection
  • Signal conditioning with low pass filter
  • Robust design, high shocks survivability

Specifications

Main IC MMA7361L
PCB size 17.8mm X 12.7mm X 1.6mm
Power supply 3.3V DC
RoHS Yes

Electrical Characteristics

Parameter Min. Typical Max. Unit
Input voltage 3 3.3 3.6 VDC
Current Consumption - 400 - uA

Hardware

MMA7361L MODULE1.jpg

Pin Pad Name Type Description
1 0G-D O 0g Detect Signal
2 XOUT A XOUT
3 YOUT A YOUT
4 ZOUT A ZOUT
5 GND G Ground
6 VDD P Power Supply
7 GND G Ground
8 Sleep I Sleep mode, Low active
9 GS I Logic input pin to select g level
10 ST I Self-Test

A: analog output

I: digital input

O: digital output

Download

Datasheet

Useful Links