Joystick Breakout Module

From ITEAD Wiki
Revision as of 08:24, 11 June 2014 by Ivy (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Overview

JOYSTICK BREAKOUT MODULE.jpg

The joystick on this module is very similar to the 'analog' joysticks on PS2 (PlayStation 2) controllers. Directional movements are simply two potentiometers - one for each axis. Pots are ~10k each.

This joystick also has a select button that is actuated when the joystick is pressed down. There are 5 pins on board: VCC, GND, X, Y and Button. Connect the module with 5V power suppy with VCC and GND, you can read out the joystick status by X,Y and button pins.

Go shopping Joystick Breakout Module (IM120525009)

Specifications

Module Type Input
Weight 20.00g
Board Size 3.8 x3.5 x 3.5cm
Operation Level Analog
Power Supply External 12V/External 24V/External 3.3V/External 5V/External 7V/External 9V

Download

Schematic

Useful Links