Iteaduino UNO

Overview

Iteaduino Uno is a microcontroller board based on the Arduino UNO. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

Features

• New external IO pin map

• Efficient DC-DC Power supply with wide range input

• 3.3V/5V Operating Voltage selection

• All pins out for Sensor and Servo

• UART/IIC interface breakout

Hardware

Spec

• Microprocessor: ATmega328,ATmega8U2
• PCB size: 68.58mm X 58.42mm X 1.6mm
• Indicators: Power,TX,RX,D13
• Power supply(recommended): 7-23V DC
• Power supply(limits): 23 VDC (max)
• Communication Protocol: UART,SPI,IIC
• Clock Speed: 16MHz

Download

Datasheet for Iteaduino UNO

Schematic for Iteaduino UNO

Fritzing Parts for Iteaduino UNO

Useful Link

<Fritzing Parts: ITEAD Development Board>