Difference between revisions of "Iteaduino Tiny"

From ITEAD Wiki
Jump to: navigation, search
(Software)
Line 4: Line 4:
 
Iteaduino Tiny is a mini development board based on Attiny85-20 master, which is cheap, compact and easy to use with low power consumption. The mainboard is a derivative board with reference to digispark design, and it supports use of specific Arduino IDE and uses Arduino syntax for programming which is quite convenient.
 
Iteaduino Tiny is a mini development board based on Attiny85-20 master, which is cheap, compact and easy to use with low power consumption. The mainboard is a derivative board with reference to digispark design, and it supports use of specific Arduino IDE and uses Arduino syntax for programming which is quite convenient.
  
 +
Go shopping [http://imall.iteadstudio.com/im130615003.html Iteaduino Tiny (SKU:IM130615003)]
 
==Features==
 
==Features==
 
* Support for the Arduino IDE 1.0+ (Windows)  
 
* Support for the Arduino IDE 1.0+ (Windows)  
Line 78: Line 79:
  
 
==Software==
 
==Software==
Let’s take Windows7 operating system as an example, before we use Iteaduino Tiny, we need to install driver for it. First, download the modified Arduino IDE offered by Digispart in the following address:  
+
Let’s take Windows7 operating system as an example, before we use Iteaduino Tiny, we need to install driver for it. First, [[download]] the modified Arduino IDE offered by Digispart in the following address:  
 
[http://sourceforge.net/projects/digistump/files/ http://sourceforge.net/projects/digistump/files/].  
 
[http://sourceforge.net/projects/digistump/files/ http://sourceforge.net/projects/digistump/files/].  
  
Line 99: Line 100:
 
[[File:IteaduinoTiny4.jpg]]
 
[[File:IteaduinoTiny4.jpg]]
  
Because there is no reset pin on Tinny85, before pressing the "upload" button to download codes onto Iteaduino Tiny, you  
+
Because there is no reset pin on Tinny85, before pressing the "upload" button to [[download]] codes onto Iteaduino Tiny, you  
 
need to unplug the USB cable on Iteaduino Tiny first to disconnect the USB connection. Then, press the "upload" button,  
 
need to unplug the USB cable on Iteaduino Tiny first to disconnect the USB connection. Then, press the "upload" button,  
after ‘Plug in device now…’ is displayed on IDE window, reconnect the USB cable, and then IDE will download the  
+
after ‘Plug in device now…’ is displayed on IDE window, reconnect the USB cable, and then IDE will [[download]] the  
 
compiled data onto Iteaduino Tiny. For details about operating procedures, please refer to user manual for Iteaduino Tiny.  
 
compiled data onto Iteaduino Tiny. For details about operating procedures, please refer to user manual for Iteaduino Tiny.  
  

Revision as of 03:59, 11 June 2014

Overview

IteaduinoTiny.jpg

Iteaduino Tiny is a mini development board based on Attiny85-20 master, which is cheap, compact and easy to use with low power consumption. The mainboard is a derivative board with reference to digispark design, and it supports use of specific Arduino IDE and uses Arduino syntax for programming which is quite convenient.

Go shopping Iteaduino Tiny (SKU:IM130615003)

Features

  • Support for the Arduino IDE 1.0+ (Windows)
  • Power via USB
  • Built-in USB
  • 4 I/O Pins
  • 8k Flash Memory (about 6k after bootloader)
  • I2C and SPI (vis USI)
  • PWM on 3 pins (more possible with Software PWM)
  • ADC on 4 pins
  • Power LED and Test/Status LED

Spec

Microcontroller ATtiny85-20
Operating Voltage 5V
Digital IO pins PB0, PB1, PB2, PB5
Analog Input pins(ADC) PB2
Indicator D1(PB1), PWR
DC Output current on per IO lines 40mA
Flash Memory 8 KB of which 2 KB used by bootloader
SRAM 512B
EEPROM 512B
Clock frequency 16 MHz
Dimension 24.89X12.7X1.6mm

Hardware

IM130615003_1.jpg

Pin Map

ISP Pin Index of Digital Pin Name of Attiny85
MISO D1 PB1
VCC - -
SCK D2 PB2
MOSI D0 PB0
RST# D5 PB5
GND - -

Software

Let’s take Windows7 operating system as an example, before we use Iteaduino Tiny, we need to install driver for it. First, download the modified Arduino IDE offered by Digispart in the following address: http://sourceforge.net/projects/digistump/files/.

We included Digispart USB driver files in the document, so we can execute the driver file (DigisparkArduino-Win32DigisparkWindowsDriverInstallDriver.exe)to install the driver in the system. Keep clicking "Next" till installation of the USB device is completed.

IteaduinoTiny1.jpg

IteaduinoTiny2.jpg

When Iteaduino Tiny is connected to a computer via USB at the first time, the system will find the new device and display installing Digispart bootloader,

Next, you can run DigisparkArduino-Win32Digispark-Arduino-1.0.4arduino.exe, open the modified Arduino IDE, where we can write and compile our codes. During downloading, you need to select the board type, browse and select Tool> Board> Digispark (Tiny Core) in sequence. Then choose Tools> programmer> Digispark.

IteaduinoTiny3.jpg

IteaduinoTiny4.jpg

Because there is no reset pin on Tinny85, before pressing the "upload" button to download codes onto Iteaduino Tiny, you need to unplug the USB cable on Iteaduino Tiny first to disconnect the USB connection. Then, press the "upload" button, after ‘Plug in device now…’ is displayed on IDE window, reconnect the USB cable, and then IDE will download the compiled data onto Iteaduino Tiny. For details about operating procedures, please refer to user manual for Iteaduino Tiny.


IteaduinoTiny5.jpg

IteaduinoTiny6.jpg

Download

Datasheet for Iteaduino Tiny

Schematic for Iteaduino Tiny

Useful Link