Difference between revisions of "Iteaduino Nano"

From ITEAD Wiki
Jump to: navigation, search
(Input and Output)
(Input and Output)
Line 51: Line 51:
  
 
===Power===
 
===Power===
 
===Memory===
 
 
The Iteaduino Nano can be powered via the Micro-B USB connection, 6-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source. The DP2102 chip on the Nano is only powered if the board is being powered over USB.
 
The Iteaduino Nano can be powered via the Micro-B USB connection, 6-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source. The DP2102 chip on the Nano is only powered if the board is being powered over USB.
 +
===Memory===
 +
The ATmega328has 32 KB, (also with 2 KB used for the bootloader), the ATmega328 has 2 KB of SRAM and 1 KB of EEPROM.
  
 
===Input and Output===
 
===Input and Output===
The ATmega328has 32 KB, (also with 2 KB used for the bootloader), the ATmega328 has 2 KB of SRAM and 1 KB of EEPROM.
+
 
  
 
===Communication===
 
===Communication===

Revision as of 08:39, 20 May 2014

Overview

IteaduinoNano.jpg

Iteaduino Nano is a small, complete, and breadboard-friendly board based on the Arduino Nano 3.0. It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Micro USB cable instead of a standard one.


Spec

Microcontroller Atmega328
Operating Voltage 5V
POWER Supply Voltage(recommended) 7~12V
Power supply Max Voltage 12V
Digital IO pins 20
Analog Input pins(ADC) 8
DC Output current on per IO lines 40mA
Flash Memory 32 KB of which 2 KB used by boot loader
SRAM 2 KB
EEPROM 1KB
Clock frequency 16 MHz
Dimension 43.18X17.78X1.6mm

Hardware top view

IM130615004.jpg

Power

The Iteaduino Nano can be powered via the Micro-B USB connection, 6-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source. The DP2102 chip on the Nano is only powered if the board is being powered over USB.

Memory

The ATmega328has 32 KB, (also with 2 KB used for the bootloader), the ATmega328 has 2 KB of SRAM and 1 KB of EEPROM.

Input and Output

Communication

Automatic (Software) Reset

Download

Datasheet for Iteaduino Nano

Schematic for Iteaduino Nano

Driver Installation

Driver

Useful Link