Difference between revisions of "Iteaduino BT"

From ITEAD Wiki
Jump to: navigation, search
(Spec)
(Spec)
Line 17: Line 17:
  
 
==Spec==
 
==Spec==
* Microprocessor: ATmega328P
+
{| border="1"
* PCB size: 10mm X 82mm X 1.6mm  
+
 
* Indicators: Power,TX,RX,D13,LED1,LED2  
+
|-
* Power supply(recommended): 7-23V DC  
+
| Microcontroller
* Power supply(limits): 23 VDC (max)  
+
| 10mm X 82mm X 1.6mm
* Communication Protocol: UART,SPI,IIC  
+
 
* Clock Speed: 16MHz  
+
|-
* RoHS: Yes
+
| PCB size
 +
| 72MHz
 +
|-
 +
| Indicators
 +
| Power,TX,RX,D13,LED1,LED2
 +
|-
 +
| Power supply(recommended)
 +
| 7-23V DC
 +
|-
 +
| Power supply(limits)
 +
| 23 VDC (max)
 +
|-
 +
| Communication Protocol
 +
| UART,SPI,IIC
 +
|-
 +
| Clock Speed
 +
| 16MHz
 +
|-
 +
| RoHS
 +
| Yes
 +
|}
  
 
==Download==
 
==Download==

Revision as of 07:09, 19 May 2014

Overview

Iteaduino-BT is an Arduino compatible board with a master/slave Bluetooth Module HC-05. It based on Arduino UNO/Duemilanove, 100% compatible with its existing program and shields, but with the bluetooth wireless funcion. The power consumption is about 50% of the original Arduino boards.

Features

  • Design for Bluetooth communication
  • Compatible with Arduino UNO/Duemilanove pins, holes and dimensions
  • Wide range external input from 7~23V DC
  • Pins out for Sensor and Servo
  • 3.3V/5V Operating Voltage selection

Hardware

IteaduinoBT1.jpg

Spec

Microcontroller 10mm X 82mm X 1.6mm
PCB size 72MHz
Indicators Power,TX,RX,D13,LED1,LED2
Power supply(recommended) 7-23V DC
Power supply(limits) 23 VDC (max)
Communication Protocol UART,SPI,IIC
Clock Speed 16MHz
RoHS Yes

Download

Datasheet for ATMEGA328

Datasheet for Iteaduino BT

Demo Code for Iteaduino BT Master Mode

Schematic for Iteaduino BT

Fritzing Parts for Iteaduino BT

Useful Link

<Correct Iteaduino BT Datasheet>

By Michael Doherty <Iteaduino BT Test Vedio>

By Benjamin Bellamy <How-To configure and use an Iteaduino BT>

<Wireless Programming Your Iteaduino BT>

<Fritzing Parts: ITEAD Development Board>