Difference between revisions of "Install OS to SD Card"

From ITEAD Wiki
Jump to: navigation, search
(Created page with "== Installing ITEAD OS under Win system== Official address for downloading win32disk imager: http://sourceforge.net/projects/win32diskimager/files/latest/download Run win32...")
 
(No difference)

Latest revision as of 07:24, 21 May 2014

Installing ITEAD OS under Win system

Official address for downloading win32disk imager:

http://sourceforge.net/projects/win32diskimager/files/latest/download

Run win32 disk imager.

OS SD Install W32Disk Imager 1.png

Select the downloaded ITEAD OS mirror image and Micro-SD card drive. In this case, Micro-SD card drive is E and OS mirror address is D:/itead.img

OS SD Install W32Disk Imager 2.png

Click 'Write', select 'Yes' in the pop-up dialogue box,and write ITEAD OS mirror image to Micro-SD card.

OS SD Install W32Disk Imager 3.png

After it is successfully written, the system will prompt 'Write Successful'.

OS SD Install W32Disk Imager 4.png

Withdraw Micro-SD card and then insert it into socket on Iteaduino PLUS, connect to power supply and monitor, then we can enter the wonderful world of ITEAD OS.

OS SD Install W32Disk Imager 5.png

Installing ITEAD OS under linux system

Let's take Ubuntu as an example.

Use shortcut keys Ctrl+Alt+T to open the terminal

Insert Micro-SD card into the system and confirm device name of Micro-SD via entering command fdisk

 sudo fdisk -l

As shown in the following figure, in this case, Ubuntu system loads Micro-SD card as /dev/sdc

And Micro-SD card file system can be unloaded via command umount

sudo umount /dev/sdc1 
sudo umount /dev/sdc2

In the folder where img file locates, write mirror image file to SD card via command dd

 dd ms=1M if=itead-plus-beat-0814-final.img of=/dev/sdc

After the card is successfully written, the system will prompt information such as time spent on and speed of writing the card.

OS SD Install dd 1.png OS SD Install dd 2.png

Withdraw Micro-SD card and then insert it into socket on Iteaduino PLUS, connect to power supply and monitor, then we can enter the wonderful world of ITEAD OS.