Difference between revisions of "ITEAD Arduino Sensor Shield"

From ITEAD Wiki
Jump to: navigation, search
(Specifications)
(Overview)
 
(5 intermediate revisions by the same user not shown)
Line 6: Line 6:
 
compatible with the mainstream two interfaces of electronic bricks in the market: 2.0mm 4-pin grove interface and  
 
compatible with the mainstream two interfaces of electronic bricks in the market: 2.0mm 4-pin grove interface and  
 
2.54mm 3-pin interface. In addition, the [[shield]] is equipped with XBee interface for users to connect it with various external  
 
2.54mm 3-pin interface. In addition, the [[shield]] is equipped with XBee interface for users to connect it with various external  
wireless modules which are compatible with XBee module interface. When working together with BTBee Pro, it can be used  
+
wireless modules which are compatible with XBee module interface. When working together with [[BTBee Pro]], it can be used  
 
as a board.
 
as a board.
 +
 +
Go shopping [http://imall.iteadstudio.com/im121211001.html ITEAD Arduino Sensor Shield (IM121211001)]
  
 
==Specifications==
 
==Specifications==
Line 20: Line 22:
 
| Compatible interfaces||2.54 3/4-pin interface, Grove 4-pin interface(1) and XBee interface
 
| Compatible interfaces||2.54 3/4-pin interface, Grove 4-pin interface(1) and XBee interface
 
|}
 
|}
 +
 +
''Note 1: V and G for voltage at the common collector and ground respectively''
  
 
==Hardware==
 
==Hardware==
 +
[[File:Arduino sensor shield1.jpg]]
  
 
==pin Map==
 
==pin Map==
 +
{| class="wikitable"
 +
|-
 +
| align="center" style="background:#f0f0f0;"|'''Index of Interface'''
 +
| align="center" style="background:#f0f0f0;"|'''Name of Interface'''
 +
| align="center" style="background:#f0f0f0;"|'''Index of Arduino'''
 +
|-
 +
| 1||D0||D0
 +
|-
 +
| 2||D1||D1
 +
|-
 +
| 3||D2||D2
 +
|-
 +
| 4||D3||D3
 +
|-
 +
| 5||D4||D4
 +
|-
 +
| 6||D5||D5
 +
|-
 +
| 7||D6||D6
 +
|-
 +
| 8||D7||D7
 +
|-
 +
| 9||D8||D8
 +
|-
 +
| 10||D9||D9
 +
|-
 +
| 11||D10||D10
 +
|-
 +
| 12||D11||D11
 +
|-
 +
| 13||D12||D12
 +
|-
 +
| 14||D13||D13
 +
|-
 +
| 15||AREF||AREF
 +
|-
 +
| 16||A0||A0
 +
|-
 +
| 17||A1||A1
 +
|-
 +
| 18||A2||A2
 +
|-
 +
| 20||A3||A3
 +
|-
 +
| 21||A4||A4
 +
|-
 +
| 22||A5||A5
 +
|-
 +
| 23||TX||D1
 +
|-
 +
| 24||RX||D0
 +
|-
 +
| 25||SCL||A5
 +
|-
 +
| 26||SDA||A4
 +
|}
  
 
==Installation==
 
==Installation==
 +
===Electronic brick interface===
 +
When connecting to 3-wire electronic brick with 2.54mm connection cable,please follow the way in the figures
 +
below. The red frame indicates position for 3-pin connection cable, after connecting, electronic brick is linked to
 +
D0 and A0 pin of the board.
 +
 +
[[File:Arduino sensor shield2.jpg]]
 +
 +
When connecting to 4-wire electronic brick with 2.54mm connection cable,please follow the way in the figures
 +
below. The red frame indicates position for 4-pin connection cable, after connecting, electronic brick is linked to
 +
D0 and D1, A0 and A1 pin of the board.
 +
 +
[[File:Arduino sensor shield3.jpg]]
 +
 +
===Power switch===
 +
It is used to switch the power supply VCC to the electronic brick. When switched to 3.3V, it indicates that VCC power
 +
supply from the [[shield]] to the electronic brick is 3.3V; when switched to 5V, it indicates that VCC power supply from the
 +
[[shield]] to the electronic brick is 5V.
 +
 +
[[File:Arduino sensor shield4.jpg]]
 +
 +
===Reset button===
 +
Press RST button to reset Arduino board; press X_RST button to reset XB33 module.
 +
 +
[[File:Arduino sensor shield5.jpg]]
  
 
==Download==
 
==Download==
 +
[ftp://imall.iteadstudio.com/Shield/IM121211001_ITEAD_Arduino_Sensor_Shield/DS_IM121211001_ITEAD_Arduino_Sensor_Shield.pdf Datasheet for ITEAD Arduino Sensor Shield]
 +
 +
[ftp://imall.iteadstudio.com/Shield/IM121211001_ITEAD_Arduino_Sensor_Shield/SCH_IM121211001_ITEAD_Arduino_Sensor_Shield.pdf Schematic for ITEAD Arduino Sensor Shield]
  
 
==Useful Links==
 
==Useful Links==

Latest revision as of 06:22, 11 June 2014

Overview

Arduino sensor shield.jpg

Arduino sensor shield is specifically designed for Arduino board to connect to various types of electronic brick modules. The latest version of shield can support electronic bricks with 3-wire and 4-wire communication, and it is compatible with the mainstream two interfaces of electronic bricks in the market: 2.0mm 4-pin grove interface and 2.54mm 3-pin interface. In addition, the shield is equipped with XBee interface for users to connect it with various external wireless modules which are compatible with XBee module interface. When working together with BTBee Pro, it can be used as a board.

Go shopping ITEAD Arduino Sensor Shield (IM121211001)

Specifications

PCB size 61.0mm X 55.46mm X 1.6mm
Working voltage 3.3/5V DC
Operating voltage 3.3/5V DC
Compatible interfaces 2.54 3/4-pin interface, Grove 4-pin interface(1) and XBee interface

Note 1: V and G for voltage at the common collector and ground respectively

Hardware

Arduino sensor shield1.jpg

pin Map

Index of Interface Name of Interface Index of Arduino
1 D0 D0
2 D1 D1
3 D2 D2
4 D3 D3
5 D4 D4
6 D5 D5
7 D6 D6
8 D7 D7
9 D8 D8
10 D9 D9
11 D10 D10
12 D11 D11
13 D12 D12
14 D13 D13
15 AREF AREF
16 A0 A0
17 A1 A1
18 A2 A2
20 A3 A3
21 A4 A4
22 A5 A5
23 TX D1
24 RX D0
25 SCL A5
26 SDA A4

Installation

Electronic brick interface

When connecting to 3-wire electronic brick with 2.54mm connection cable,please follow the way in the figures below. The red frame indicates position for 3-pin connection cable, after connecting, electronic brick is linked to D0 and A0 pin of the board.

Arduino sensor shield2.jpg

When connecting to 4-wire electronic brick with 2.54mm connection cable,please follow the way in the figures below. The red frame indicates position for 4-pin connection cable, after connecting, electronic brick is linked to D0 and D1, A0 and A1 pin of the board.

Arduino sensor shield3.jpg

Power switch

It is used to switch the power supply VCC to the electronic brick. When switched to 3.3V, it indicates that VCC power supply from the shield to the electronic brick is 3.3V; when switched to 5V, it indicates that VCC power supply from the shield to the electronic brick is 5V.

Arduino sensor shield4.jpg

Reset button

Press RST button to reset Arduino board; press X_RST button to reset XB33 module.

Arduino sensor shield5.jpg

Download

Datasheet for ITEAD Arduino Sensor Shield

Schematic for ITEAD Arduino Sensor Shield

Useful Links