ITDB02 Arduino MEGA Shield

From ITEAD Wiki
Jump to: navigation, search

Overview

ITDB02 Arduino MEGA Shield.jpg

The ITDB02 LCD module works in 3.3V voltage level and it's not compatible with Arduino MGEA pins , so we make a shield for Arduino MEGA. Now user can directly plug the ITDB02 in the shield and stand on the Arduino MEGA board.

ITDB02 Arduino MEGA shield support both 3.3V mainboard and 5V mainboard, so it not just can be used with Arduino MEGA but can with other Arduino MEGA compatible mainboards , like ChipKit MAX32.

Note: It does not support Iteaduino Mega.

Go shopping ITDB02 Arduino MEGA Shield (IM120417024)

Features

  • Arduino MEGA compatible.
  • Touch or SD card expand
  • Arduino Library support

Hardware

IM120417024_ITDB02_MEGA_Shield.jpg

Pin of Arduino With ITDB02 With ITDB02
3V3 LED_A RD
5V VCC
GND GND GND
D22(PA0) DB8 -
D23(PA1) DB9 -
D24(PA2) DB10 -
D25(PA3) DB11 -
D26(PA4) DB12 -
D27(PA5) DB13 -
D28(PA6) DB14 -
D29(PA7) DB15 -
D37(PC0) DB0 -
D36(PC1) DB1 -
D35(PC2) DB2 -
D34(PC3) DB3 -
D33(PC4) DB4 -
D32(PC5) DB5 -
D31(PC6) DB6 -
D30(PC7) DB7 -
D41(PG0) RESET -
D40(PG1) CS -
D39(PG2) WR -
D38(PD7) RS -
D50(PB3) SD_OUT -
D51(PB2) SD_IN -
D52(PB1) SD_CLK -
D53(PB0) SD_CS -
D6 D_CLK -
D5 D_CS -
D4 D_IN -
D3 D_OUT -
D2 D_IRQ

Support List

ITDB02-2.2

ITDB02-2.4E

ITDB02-2.8

ITDB02-3.2S

ITDB02-3.2WD

ITDB02-4.3

ITDB02-5.0

Download

Datasheet for ITDB02 Arduino MEGA Shield

Schematic for ITDB02 Arduino MEGA Shield

Useful Links

by eried <Arduino mega iteadstudio LCD shield holder>