Difference between revisions of "ITDB02-5.0"

From ITEAD Wiki
Jump to: navigation, search
(Overview)
(Hardware)
Line 7: Line 7:
  
 
==Hardware==
 
==Hardware==
 +
http://imall.iteadstudio.com/media/wysiwyg/Products/TFTLCDs/ITDB02-5.0.jpg
 +
 +
{| class="wikitable"
 +
|-
 +
| align="center" style="background:#f0f0f0;"|'''Pin'''
 +
| align="center" style="background:#f0f0f0;"|'''Type*'''
 +
| align="center" style="background:#f0f0f0;"|'''Description'''
 +
|-
 +
| GND||G||Ground
 +
|-
 +
| VCC||P||5V Power Supply pin
 +
|-
 +
| NC||-||No connection
 +
|-
 +
| RS||I||Data/Command selection
 +
|-
 +
| WR||I||Write signal enable, low active
 +
|-
 +
| RD||I||Read signal enable, low active
 +
|-
 +
| DB8||I||Data Bus
 +
|-
 +
| DB9||I||Data Bus
 +
|-
 +
| DB10||I||Data Bus
 +
|-
 +
| DB11||I||Data Bus
 +
|-
 +
| DB12||I||Data Bus
 +
|-
 +
| DB13||I||Data Bus
 +
|-
 +
| DB14||I||Data Bus
 +
|-
 +
| DB15||I||Data Bus
 +
|-
 +
| CS||I||Chip Selection,Low level active
 +
|-
 +
| NC||-||No connection
 +
|-
 +
| LED||P||Backlight
 +
|-
 +
| NC||-||No connection
 +
|-
 +
| DB0||I||Data Bus
 +
|-
 +
| DB1||I||Data Bus
 +
|-
 +
| DB2||I||Data Bus
 +
|-
 +
| DB3||I||Data Bus
 +
|-
 +
| DB4||I||Data Bus
 +
|-
 +
| DB5||I||Data Bus
 +
|-
 +
| DB6||I||Data Bus
 +
|-
 +
| DB7||I||Data Bus
 +
|-
 +
| T_CLK||I||Touch clock
 +
|-
 +
| T_CS||I||Touch chip selection
 +
|-
 +
| T_DIN||I||Touch data input
 +
|-
 +
| T_BUSY||O||Touch status
 +
|-
 +
| T_DOUT||O||Touch data output
 +
|-
 +
| T_IRQ||O||Touch interrupt
 +
|-
 +
| SD_SO||O||SD MISO
 +
|-
 +
| SD_SCK||I||SD SCK
 +
|-
 +
| SD_SI||I||SD MOSI
 +
|-
 +
| SD_NSS||I||SD NSS
 +
|-
 +
| NC||-||No connection
 +
|-
 +
| NC||-||No connection
 +
|}
  
 
==Useful Links==
 
==Useful Links==

Revision as of 06:48, 28 May 2014

Overview

ITDB02-5.0.jpg

ITDB02-5.0 module is 5.0" TFT LCD with 65K color 800 x 480 resolutions. The controller of this LCD module is SSD1963, it supports 16bit data interface with 4 wires control interface. Moreover, this module includes the touch screen and SD card socket.

ITDB02-5.0 is supported by UTFT Library.

Hardware

ITDB02-5.0.jpg

Pin Type* Description
GND G Ground
VCC P 5V Power Supply pin
NC - No connection
RS I Data/Command selection
WR I Write signal enable, low active
RD I Read signal enable, low active
DB8 I Data Bus
DB9 I Data Bus
DB10 I Data Bus
DB11 I Data Bus
DB12 I Data Bus
DB13 I Data Bus
DB14 I Data Bus
DB15 I Data Bus
CS I Chip Selection,Low level active
NC - No connection
LED P Backlight
NC - No connection
DB0 I Data Bus
DB1 I Data Bus
DB2 I Data Bus
DB3 I Data Bus
DB4 I Data Bus
DB5 I Data Bus
DB6 I Data Bus
DB7 I Data Bus
T_CLK I Touch clock
T_CS I Touch chip selection
T_DIN I Touch data input
T_BUSY O Touch status
T_DOUT O Touch data output
T_IRQ O Touch interrupt
SD_SO O SD MISO
SD_SCK I SD SCK
SD_SI I SD MOSI
SD_NSS I SD NSS
NC - No connection
NC - No connection

Useful Links