Difference between revisions of "ITDB02-3.2S Arduino Shield V2"

From ITEAD Wiki
Jump to: navigation, search
m (Overview)
m (Download)
 
Line 149: Line 149:
  
 
[[:File:TJC-9341-032 Display Specifications Book.pdf | TJC-9341-032 Display Specifications Book]]
 
[[:File:TJC-9341-032 Display Specifications Book.pdf | TJC-9341-032 Display Specifications Book]]
 +
 +
[[:File:9341 8-bit interface reminder.pdf | 9341 8-bit interface reminder]]
  
 
==Useful Links==
 
==Useful Links==
 
<del>[http://www.rinkydinkelectronics.com/library.php?id=51 by Henning Kalsen <UTFT Library>]</del>
 
<del>[http://www.rinkydinkelectronics.com/library.php?id=51 by Henning Kalsen <UTFT Library>]</del>

Latest revision as of 03:35, 21 July 2017

Overview

ITDB02-3.2S.jpg

ITDB02-3.2S V2 module is 3.2" TFT LCD with 65K color 320 x 240 resolutions. The controller of this LCD module is ILI9341. It supports 16bit data interface with control interface of four wires. Moreover, this module contains the touch screen and SD card socket.

NOTE: this screen adopts new driver IC, thus the old library is not applicable. New library will be updated soon, stay tuned!

Go shopping ITDB02-3.2S V2(IM160418005)

Features

  • Compatible with new UTFT library
  • With SD Card Socket

Specifications

Driver IC ILI9341
Backlight 5LEDs
Power supply 3.3V
Touch Panel Y
Touch IC XPT2046
Resolution 240*320
Size 84mm*57mm

Electrical Characteristics

Parameter Min. Typical Max. Unit
Power voltage 4.5 5 5.5 VDC
Input voltage VinH (Target Voltage = 3.3V) 3 3.3 3.6 V
Input voltage VinL -0.3 0 0.5 V
Current Consumption - 20 40 mA

Hardware

IM120419005_ITDB02_3.2S.jpg ITDB02-3.2-parallel.jpg

Bottom View

Pin Map

Pin Type* Description
GND G Ground
VCC P 5V Power Supply pin
NC - No connection
RS I Data/Command selection
WR I Write signal enable, low active
RD I Read signal enable, low active
DB8 I Data Bus
DB9 I Data Bus
DB10 I Data Bus
DB11 I Data Bus
DB12 I Data Bus
DB13 I Data Bus
DB14 I Data Bus
DB15 I Data Bus
CS I Chip Selection,Low level active
NC - No connection
LED P Backlight
NC - No connection
DB0 I Data Bus
DB1 I Data Bus
DB2 I Data Bus
DB3 I Data Bus
DB4 I Data Bus
DB5 I Data Bus
DB6 I Data Bus
DB7 I Data Bus
T_CLK I Touch clock
T_CS I Touch chip selection
T_DIN I Touch data input
T_BUSY O Touch status
T_DOUT O Touch data output
T_IRQ O Touch interrupt
SD_SO O SD MISO
SD_SCK I SD SCK
SD_SI I SD MOSI
SD_NSS I SD NSS
NC - No connection
NC - No connection

Type*:P: Power supply; G:Ground; I:Input; O:Output; The ITDB02_3.2 uses the ILI9341 controller , it support 16bit data interface. The touch IC is TSC2046.

Download

Schematic

Demo code

TJC-9341-032 Display Specifications Book

9341 8-bit interface reminder

Useful Links

by Henning Kalsen <UTFT Library>