Difference between revisions of "ITDB02-2.4S/zh-cn"

From ITEAD Wiki
Jump to: navigation, search
(Created page with "==规格== {| border="1" | PCB尺寸||44mm X 74mm X 1.6mm |- | 电源||5V DC |- | 驱动IC||ILI9341V |- | 分辨率||320*240 |- |}")
(Created page with "==电气特性== {| class="wikitable" |- | align="center" style="background:#f0f0f0;"|'''参数''' | align="center" style="background:#f0f0f0;"|'''最小值''' | align="center...")
Line 23: Line 23:
 
|}
 
|}
  
==Electronic Characteristics==
+
==电气特性==
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
| align="center" style="background:#f0f0f0;"|'''Parameter'''
+
| align="center" style="background:#f0f0f0;"|'''参数'''
| align="center" style="background:#f0f0f0;"|'''Min.'''
+
| align="center" style="background:#f0f0f0;"|'''最小值'''
| align="center" style="background:#f0f0f0;"|'''Typical'''
+
| align="center" style="background:#f0f0f0;"|'''经典值'''
| align="center" style="background:#f0f0f0;"|'''Max.'''
+
| align="center" style="background:#f0f0f0;"|'''最大值'''
| align="center" style="background:#f0f0f0;"|'''Unit'''
+
| align="center" style="background:#f0f0f0;"|'''单位'''
 
|-
 
|-
| Power supply||4.5||5||5.5||VDC
+
| 电源||4.5||5||5.5||VDC
 
|-
 
|-
| Input voltage VinH (Target Voltage = 3.3V)||3||3.3||3.6||V
+
| 最高输入电压 (Target Voltage = 3.3V)||3||3.3||3.6||V
 
|-
 
|-
| Input voltage VinH (Target Voltage = 5V)||4.5||5||5.5||V
+
| 最高输入电压 (Target Voltage = 5V)||4.5||5||5.5||V
 
|-
 
|-
| Input voltage VinL||-0.3||0||0.5||V
+
| 最低输入电压||-0.3||0||0.5||V
 
|-
 
|-
| Current Consumption||-||40||80||mA
+
| 电流||-||40||80||mA
 
|}
 
|}
  

Revision as of 01:44, 9 August 2014

概述

IM140714002 5.jpg

ITDB02-2.4S 是一个2.4inch SPI接口的TFT LCD模块,分辨率为320X240,262K种颜色。LCD模块的控制芯片为ILI9341V,它的接口是SPI的,需要6根线(SCK,MISO,MOSI,CS,D/C,RST)来控制。而且,这个模块还包含了micro SD卡接口,带触摸功能。

购买 ITDB02-2.4S (SKU:IM140714002)

特点

  • 兼容3.3/5V操作电平
  • 自带micro SD卡接口
  • 支持用IO口或PWM来控制背光
  • 触摸屏

规格

PCB尺寸 44mm X 74mm X 1.6mm
电源 5V DC
驱动IC ILI9341V
分辨率 320*240

电气特性

参数 最小值 经典值 最大值 单位
电源 4.5 5 5.5 VDC
最高输入电压 (Target Voltage = 3.3V) 3 3.3 3.6 V
最高输入电压 (Target Voltage = 5V) 4.5 5 5.5 V
最低输入电压 -0.3 0 0.5 V
电流 - 40 80 mA

Hardware

IM140714002pic1.jpg IM140714002pic2.jpg IM140714002pic3.jpg

Pin Map

Pin Type* Description
VCC P 5V Power supply pin
GND G Ground
SCK I SPI SCK
MISO O SPI MISO
MOSI I SPI MOSI
CS I Chip Select for TFT
D/C I Command or parameter select
RST I RESET signal for TFT
LEDA* I Backlight control pin
SD_CS I Chip Select for SD
T_CS I Chip Select for touch function
T_IRQ O Interrupt output for touch
  • Type: P--Power supply; G--Ground; I--Input; O--Output.
  • LEDA: When LEDA is set as high electronic level, the backlight turns on. When it's set as low electronic level, the backlight turns off.

Instruction

1.Touch Function

  • Upload 2_4_spi_touch.ino into UNO main board
File:2_4_spi_touch.zip
  • Connect ITDB02-2.4S module to UNO according to the table as below:
2.4S pins UNO pins
VCC 5V
GND GND
SCK D13
MISO D12
MOSI D11
CS D10
D/C D9
RST D8
LEDA 5V/3V3
SD_CS D4
T_CS D2
T_IRQ D3
  • Power UNO mainboard, you can start to draw any line or pattern on the screen.

IM140714002in2.gif

2.Display the image from micro SD card

  • Download the library from this link: https://github.com/adafruit/Adafruit_ILI9340 , then extract it into the directory \arduino\libraries
  • Copy the image woof.bmp from the directory Adafruit_ILI9340\examples\spitftbitmap to your SD card, then plug the card into the SD card slot on ITDB02-2.2S LCD module
  • Use arduino IDE to open spitftbitmap.ino in the directory Adafruit_ILI9340\examples\spitftbitmap then upload it to UNO main board.
  • Select 5V electronic level in the 2.2S LCD module, then use dupont lines to connect UNO and LCD module according to the table as below:
2.4S pins UNO pins
VCC 5V
GND GND
SCK D13
MISO D12
MOSI D11
CS D10
D/C D9
RST D8
LEDA 5V/3V3
SD_CS D4
  • Power UNO main board, a picture of dog showed on the display.

Download

Specification for TFT LCD module--File:H24TM84A-spec.pdf

Schematic--File:IM140714002-ITDB02-2.4S-schematic.pdf

Useful Link

https://github.com/adafruit/Adafruit_ILI9340