Difference between revisions of "ITDB02-2.4E"

From ITEAD Wiki
Jump to: navigation, search
(Useful Links)
m (V2 Change List)
 
(11 intermediate revisions by 2 users not shown)
Line 1: Line 1:
==Overview==
+
{| class="FCK__ShowTableBorders" align="left"
 
+
[[File:ITDB02-2.4E.jpg|thumb|400px|right]]
+
ITDB02-2.4E module is 2.4" TFT LCD with 65K color 320 x 240 resolutions. The controller of this LCD module is S6D1121, it supports 8bit / 16bit data interface with 4 wires control interface. Moreover, this module includes the touch screen and SD card socket.
+
 
+
==Features==
+
* Compatible with 3.3/5V operation voltage level
+
* 8bits/16bits operation compatible
+
* Compatible with UTFT library
+
* With SD Card Socket
+
 
+
==Specifications==
+
{| border="1"
+
 
+
| PCB size||65.53mm X 50.8mm X 1.6mm
+
 
|-
 
|-
| Power supply||5V DC
+
| [[File:ITDB02-2.4E-display-4.jpg|400px|ITDB02-2.4E V2]] <br>
 +
| [[File:ITDB02-2.4E-display-3.jpg|400px|ITDB02-2.4E V1]]<br>
 
|-
 
|-
| RoHS||Yes
+
| <div style="text-align: center">[[ITDB02-2.4E V2|ITDB02-2.4E V2(SKU:IM160418002)]]</div>
 +
| <div style="text-align: center">[[ITDB02-2.4E V1|ITDB02-2.4E V1(SKU:IM120419004))]]</div>
 
|}
 
|}
 +
<br clear="all">
  
==Electrical Characteristics==
+
==V2 Change List==
{| class="wikitable"
+
* V2 and V1 almost the same, but they use different driver IC.
|-
+
| align="center" style="background:#f0f0f0;"|'''Parameter'''
+
| align="center" style="background:#f0f0f0;"|'''Min.'''
+
| align="center" style="background:#f0f0f0;"|'''Typical'''
+
| align="center" style="background:#f0f0f0;"|'''Max.'''
+
| align="center" style="background:#f0f0f0;"|'''Unit'''
+
|-
+
| Power voltage||4.5||5||5.5||VDC
+
|-
+
| Input voltage VinH (Target Voltage = 3.3V)||3||3.3||3.6||V
+
|-
+
| Input voltage VinH (Target Voltage = 5V)||4.5||5||5.5||V
+
|-
+
| Input voltage VinL||-0.3||0||0.5||V
+
|-
+
| Current Consumption||-||20||40||mA
+
|}
+
 
+
==Hardware==
+
http://imall.iteadstudio.com/media/wysiwyg/Products/TFTLCDs/IM120419004_ITDB02_2.4E.jpg
+
 
+
Bottom View
+
 
+
Pin Map list
+
 
+
{| class="wikitable"
+
|-
+
| align="center" style="background:#f0f0f0;"|'''Pin'''
+
| align="center" style="background:#f0f0f0;"|'''Type*'''
+
| align="center" style="background:#f0f0f0;"|'''Description'''
+
|-
+
| GND||G||Ground
+
|-
+
| VCC||P||5V Power Supply pin
+
|-
+
| NC||-||No connection
+
|-
+
| RS||I||Data/Command selection
+
|-
+
| WR||I||Write signal enable, low active
+
|-
+
| RD||I||Read signal enable, low active
+
|-
+
| DB8||I||Data Bus
+
|-
+
| DB9||I||Data Bus
+
|-
+
| DB10||I||Data Bus
+
|-
+
| DB11||I||Data Bus
+
|-
+
| DB12||I||Data Bus
+
|-
+
| DB13||I||Data Bus
+
|-
+
| DB14||I||Data Bus
+
|-
+
| DB15||I||Data Bus
+
|-
+
| CS||I||Chip Selection,Low level active
+
|-
+
| NC||-||No connection
+
|-
+
| LED||P||Backlight
+
|-
+
| NC||-||No connection
+
|-
+
| DB0||-||No connection(8bit mode)
+
|-
+
| DB0||I||Data Bus(16bit mode)
+
|-
+
| DB1||-||No connection(8bit mode)
+
|-
+
| DB1||I||Data Bus(16bit mode)
+
|-
+
| DB2||-||No connection(8bit mode)
+
|-
+
| DB2||I||Data Bus(16bit mode)
+
|-
+
| DB3||-||No connection(8bit mode)
+
|-
+
| DB3||I||Data Bus(16bit mode)
+
|-
+
| DB4||-||No connection(8bit mode)
+
|-
+
| DB4||I||Data Bus(16bit mode)
+
|-
+
| DB5||-||No connection(8bit mode)
+
|-
+
| DB5||I||Data Bus(16bit mode)
+
|-
+
| DB6||-||No connection(8bit mode)
+
|-
+
| DB6||I||Data Bus(16bit mode)
+
|-
+
| DB7||-||No connection(8bit mode)
+
|-
+
| DB7||I||Data Bus(16bit mode)
+
|-
+
| T_CLK||I||Touch clock
+
|-
+
| T_CS||I||Touch chip selection
+
|-
+
| T_DIN||I||Touch data input
+
|-
+
| T_BUSY||O||Touch status
+
|-
+
| T_DOUT||O||Touch data output
+
|-
+
| T_IRQ||O||Touch interrupt
+
|-
+
| SD_SO||O||SD MISO
+
|-
+
| SD_SCK||I||SD SCK
+
|-
+
| SD_SI||I||SD MOSI
+
|-
+
| SD_NSS||I||SD NSS
+
|-
+
| NC||-||No connection
+
|-
+
| NC||-||No connection
+
|}
+
 
+
Type *:P: Power supply; G:Ground; I:Input; O:Output;
+
 
+
The ITDB02_2.4E uses the S6D1121 controller , it support 8/16bit data interface. The touch IC is TSC2046.
+
 
+
==Installation==
+
When operate in 8 bits mode, the mode switch need to set in 8bits side.
+
 
+
When operate in 16 bits mode, the mode switch need to set in 16bits side.
+
 
+
==Download==
+
[ftp://imall.iteadstudio.com/IM120419004_ITDB02_2.4E/DS_S6D1121.pdf Datasheet for S6D1121]
+
 
+
[ftp://imall.iteadstudio.com/IM120419004_ITDB02_2.4E/DS_IM120419004_ITDB02_2.4E.pdf Datasheet for ITDB02_2.4E]
+
 
+
[ftp://imall.iteadstudio.com/IM120419004_ITDB02_2.4E/SCH_IM120419004_ITDB02_2.4E.pdf Schematic]
+
 
+
[ftp://imall.iteadstudio.com/IM120419004_ITDB02_2.4E/DC_IM120419004_ITDB02_2.4E.zip Demo code]
+
 
+
[ftp://imall.iteadstudio.com/IM120419001_ITDB02_1.8SP/Lib_UTFT.zip UTFT library]
+
 
+
==Useful Links==
+
[http://henningkarlsen.com/electronics/library.php?id=51 by Henning Kalsen <UFTF Library>]
+
 
+
[http://blog.iteadstudio.com/raspberry-pi-with-tft-lcd-demo/ <Raspberry PI With TFT LCD Demo>]
+

Latest revision as of 01:29, 20 April 2016

ITDB02-2.4E V2
ITDB02-2.4E V1


V2 Change List

  • V2 and V1 almost the same, but they use different driver IC.